Messages in this thread | | | Date | Mon, 06 May 2002 23:42:11 +0200 | From | Carlo Scarfoglio <> | Subject | 2.5.14 IDE+TCQ+Reiserfs kernel bug |
| |
I just compiled and installed 2,5,14 with Tagged command queue, TCQ on by default enabled and Default queue depth = 32. I have an ASUS A7V 333 (Promise 20276) with a IBM DTLA 307030 connected to the Promise controller (see boot.msg below). The disks is reiserfs formatted. I use it for backups. I mounted it with kernel 2.5.14 and tied to copy a 100MB file to it. It stopped at 40% with the above message. It cannot be unmounted. I'll try to reboot to see what damage it has suffered.
This is an excerpt from /var/log/messages May 6 23:19:43 carlocasa kernel: found reiserfs format "3.6" with standard journal May 6 23:19:44 carlocasa kernel: reiserfs:warning: CONFIG_REISERFS_CHECK is set ON May 6 23:19:44 carlocasa kernel: reiserfs:warning: - it is slow mode for debugging. May 6 23:19:44 carlocasa kernel: sh-461: journal_init: wrong transaction max size (8192). Changed to 1024 May 6 23:19:44 carlocasa kernel: Reiserfs journal params: device 22:01, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 900, max trans age 30 May 6 23:19:44 carlocasa kernel: reiserfs: checking transaction log (ide3(34,1)) for (ide3(34,1)) May 6 23:19:44 carlocasa kernel: journal-1153: found in header: first_unflushed_offset 441, last_flushed_trans_id 3099 May 6 23:19:44 carlocasa kernel: journal-1206: Starting replay from offset 441, trans_id 3100 May 6 23:19:44 carlocasa kernel: journal-1299: Setting newest_mount_id to 54 May 6 23:19:44 carlocasa kernel: Using r5 hash to sort names May 6 23:21:15 carlocasa kernel: vs: 4020: is_reusable: bitmap block 1867776(230) can't be freed or reused May 6 23:21:15 carlocasa kernel: 0: reiserfs_get_block May 6 23:21:15 carlocasa kernel: reiserfs[264]: assertion !( buffer_locked ((REISERFS_SB(s)->s_ap_bitmap)[i]) || is_reusable (s, search_start, 0) == 0 ) failed at bitmap.c:421:do_reiserfs_new_blocknrs: vs-4140: bitmap block is locked or bad block number found May 6 23:21:15 carlocasa kernel: kernel BUG at prints.c:335! May 6 23:21:15 carlocasa kernel: invalid operand: 0000 May 6 23:21:15 carlocasa kernel: CPU: 0 May 6 23:21:15 carlocasa kernel: EIP: 0010:[<c01a3969>] Not tainted May 6 23:21:15 carlocasa kernel: EFLAGS: 00010282 May 6 23:21:15 carlocasa kernel: eax: 000000e6 ebx: c030b6a0 ecx: fffffeb4 edx: df9b5200 May 6 23:21:15 carlocasa kernel: esi: 00000000 edi: de5e6800 ebp: 00000000 esp: dd477cc8 May 6 23:21:15 carlocasa kernel: ds: 0018 es: 0018 ss: 0018 May 6 23:21:15 carlocasa kernel: Process mc (pid: 264, threadinfo=dd476000 task=dd4742c0) May 6 23:21:15 carlocasa kernel: Stack: c03140f4 c03ed800 c030b6a0 dd477cec 00000012 001c8000 c01909f2 00000000 May 6 23:21:15 carlocasa kernel: c030b6a0 00000108 000001a5 00137fff 00000000 dafbf3b0 00000007 dd476000 May 6 23:21:15 carlocasa kernel: 00000001 dd477de0 00000039 00000000 c0190d82 dd477e14 dd477de0 001c8000 May 6 23:21:15 carlocasa kernel: Call Trace: [<c01909f2>] [<c0190d82>] [<c0198ff2>] [<c01ac4f4>] [<c013b5f0>] May 6 23:21:15 carlocasa kernel: [<c013a344>] [<c013abb2>] [<c0198c60>] [<c019b8c3>] [<c0198c60>] [<c012a4ff>] May 6 23:21:15 carlocasa kernel: [<c0128fe0>] [<c0137bd6>] [<c0106f5b>] May 6 23:21:15 carlocasa kernel: May 6 23:21:15 carlocasa kernel: Code: 0f 0b 4f 01 fa 40 31 c0 68 00 d8 3e c0 b8 03 41 31 c0 8d 96 May 6 23:21:15 carlocasa kernel: <3>error: mc[264] exited with preempt_count 1
This is /var/log/boot.msg
nspecting /boot/System.map Symbol table has incorrect version number.
Cannot find map file. No module symbols loaded. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.5.14 (root@carlocasa) (gcc version 2.95.3 20010315 (release)) #8 Mon May 6 23:11:15 CEST 2002 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009d800 (usable) <4> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) <4> BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) <4> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>511MB LOWMEM available. <4>On node 0 totalpages: 131068 <4>zone(0): 4096 pages. <4>zone(1): 126972 pages. <4>zone(2): 0 pages. <4>Kernel command line: BOOT_IMAGE=linux2514 ro root=1607 aic7xxx=seltime:0 <4>Found and enabled local APIC! <6>Initializing CPU#0 <4>Detected 1532.941 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 3060.53 BogoMIPS <4>Memory: 516072k/524272k available (1973k kernel code, 7804k reserved, 677k data, 252k init, 0k highmem) <4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <7>CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <7>CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <6>Machine check exception polling timer started. <7>CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 <7>CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 <4>CPU: AMD Athlon(TM) XP 1800+ stepping 02 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1532.9260 MHz. <4>..... host bus clock speed is 266.5958 MHz. <4>cpu: 0, clocks: 2665958, slice: 1332979 <4>CPU0<T0:2665952,T1:1332960,D:13,S:1332979,C:2665958> <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>PCI: PCI BIOS revision 2.10 entry at 0xf1aa0, last bus=1 <6>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <3>Unknown bridge resource 0: assuming transparent <6>PCI: Using IRQ router VIA [1106/3147] at 00:11.0 <6>usb.c: registered new driver usbfs <6>usb.c: registered new driver hub <6>SBF: Simple Boot Flag extension found and enabled. <6>SBF: Setting boot flags 0x80 <4>Starting kswapd <4>BIO: pool of 256 setup, 14Kb (56 bytes/bio) <4>biovec: init pool 0, 1 entries, 12 bytes <4>biovec: init pool 1, 4 entries, 48 bytes <4>biovec: init pool 2, 16 entries, 192 bytes <4>biovec: init pool 3, 64 entries, 768 bytes <4>biovec: init pool 4, 128 entries, 1536 bytes <4>biovec: init pool 5, 256 entries, 3072 bytes <6>NTFS driver 2.0.6 [Flags: R/O]. Copyright (c) 2001,2002 Anton Altaparmakov. <6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] <6>parport0: irq 7 detected <7>parport0: Found 1 daisy-chained devices <7>parport0: device reported incorrect length field (61, should be 62) <6>parport0 (addr 0): SCSI adapter, IMG VP1 <4>i2c-core.o: i2c core module <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>lp0: using parport0 (polling). <6>Real Time Clock Driver v1.11 <4>block: 256 slots per queue, batch=32 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker <6> http://www.scyld.com/network/ne2k-pci.html <6>PCI: Found IRQ 10 for device 00:0e.0 <6>PCI: Sharing IRQ 10 with 00:05.0 <6>PCI: Sharing IRQ 10 with 00:07.0 <4>eth0: RealTek RTL-8029 found at 0xa400, IRQ 10, 00:20:18:39:CF:17. <6>PPP generic driver version 2.4.2 <6>PPP Deflate Compression module registered <6>PPP BSD Compression module registered <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 439M <6>agpgart: Detected Via Apollo Pro KT266 chipset <6>agpgart: AGP aperture is 64M @ 0xe0000000 <6>[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB <6>[drm] Initialized mga 3.0.2 20010321 on minor 0 <6>ATA/ATAPI driver v7.0.0 <6>ATA: system bus speed 33MHz <6>ATA: interface: Promise Technology, Inc. 20276, on PCI slot 00:06.0 <6>PCI: Found IRQ 5 for device 00:06.0 <6>ATA: chipset rev.: 1 <6>ATA: non-legacy mode: IRQ probe delayed <4> ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio <4> ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio <6>ATA: unknown interface: VIA Technologies, Inc. Bus Master IDE (1106:0571) on PCI slot 00:11.1 <4>PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq. <6>ATA: chipset rev.: 6 <6>ATA: non-legacy mode: IRQ probe delayed <4> ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio <4> ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:pio <4>hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive <4>hdc: IBM-DHEA-38451, ATA DISK drive <4>hde: IBM-DPTA-372050, ATA DISK drive <4>hdg: IBM-DTLA-307030, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ide2 at 0xd400-0xd407,0xd002 on irq 5 <4>ide3 at 0xb800-0xb807,0xb402 on irq 5 <6>hda: 5008752 sectors w/76KiB Cache, CHS=4969/16/63, DMA <6>hdc: 16514064 sectors w/472KiB Cache, CHS=16383/16/63, UDMA(33) <4>hde: tagged command queueing enabled, command queue depth 32 <6>hde: 40088160 sectors w/1961KiB Cache, CHS=39770/16/63, UDMA(66) <4>hdg: tagged command queueing enabled, command queue depth 32 <6>hdg: 60036480 sectors w/1916KiB Cache, CHS=59560/16/63, UDMA(100) <6>Partition check: <6> hda: [PTBL] [621/128/63] hda1 hda2 < hda5 hda6 > hda3 <6> hdc: [PTBL] [1027/255/63] hdc1 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 > <6> hde: hde1 hde2 <6> hdg: hdg1 <6>SCSI subsystem driver Revision: 1.00 <6>PCI: Found IRQ 11 for device 00:0d.0 <6>PCI: Sharing IRQ 11 with 01:00.0 <4>ahc_pci:0:13:0: Host Adapter Bios disabled. Using default SCSI device parameters <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 <4> <Adaptec 2902/04/10/15/20/30C SCSI adapter> <4> aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs <4> <4>(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15) <4> Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: SCANNER Model: Rev: 2.00 <4> Type: Scanner ANSI SCSI revision: 01 CCS <4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 <4>Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0 <4>sr0: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.12 <4>(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15) <4>sr1: scsi3-mmc drive: 2x/6x xa/form2 cdda tray <5>Attached scsi generic sg2 at scsi0, channel 0, id 6, lun 0, type 6 <6>Advanced Linux Sound Architecture Driver Version 0.9.0rc1 (Mon Apr 29 06:46:09 2002 UTC). <7>kmod: failed to exec /sbin/modprobe -s -k snd-card-0, errno = 2 <6>PCI: Found IRQ 10 for device 00:05.0 <6>PCI: Sharing IRQ 10 with 00:07.0 <6>PCI: Sharing IRQ 10 with 00:0e.0 <6>PCI: Found IRQ 12 for device 00:0f.0 <6>ALSA device list: <6> #0: C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 10 <6> #1: Ensoniq AudioPCI ES1371 at 0xa000, irq 12 <6>uhci.c: USB Universal Host Controller Interface driver v1.1 <6>PCI: Found IRQ 3 for device 00:11.2 <6>IRQ routing conflict for 00:11.2, have irq 9, want irq 3 <6>IRQ routing conflict for 00:11.3, have irq 9, want irq 3 <6>uhci.c: USB UHCI at I/O 0x9400, IRQ 9 <6>hcd.c: new USB bus registered, assigned bus number 1 <6>hub.c: USB hub found at / <6>hub.c: 2 ports detected <6>PCI: Found IRQ 3 for device 00:11.3 <6>IRQ routing conflict for 00:11.2, have irq 9, want irq 3 <6>IRQ routing conflict for 00:11.3, have irq 9, want irq 3 <6>uhci.c: USB UHCI at I/O 0x9000, IRQ 9 <6>hcd.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found at / <6>hub.c: 2 ports detected <6>usb.c: registered new driver usblp <6>printer.c: v0.12: USB Printer Device Class driver <6>Initializing USB Mass Storage driver... <6>usb.c: registered new driver usb-storage <6>USB Mass Storage support registered. <6>usb.c: registered new driver hiddev <6>usb.c: registered new driver hid <6>hid-core.c: v1.31:USB HID core driver <6>mice: PS/2 mouse device common for all mice <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 4096 buckets, 32Kbytes <6>TCP: Hash tables configured (established 32768 bind 32768) <4>ip_conntrack version 2.0 (4095 buckets, 32760 max) - 292 bytes per conntrack <4>ip_tables: (C) 2000-2002 Netfilter core team <4>arp_tables: (C) 2002 David S. Miller <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>VFS: Mounted root (ext2 filesystem) readonly. <4>Freeing unused kernel memory: 252k freed <4>spurious 8259A interrupt: IRQ7. <6>hub.c: new USB device 00:11.2-1, assigned address 2 <4>hid-core.c: ctrl urb status -32 received <6>input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse ® with IntelliEye] on usb-00:11.2-1 <6>hub.c: new USB device 00:11.2-2, assigned address 3 <4>usb.c: USB device 3 (vend/prod 0x5e3/0x502) is not claimed by any active driver. <6>hub.c: new USB device 00:11.3-1, assigned address 2 <4>hid-core.c: ctrl urb status -32 received <4>hid-core.c: ctrl urb status -32 received <4>hid-core.c: ctrl urb status -32 received <4>hid-core.c: ctrl urb status -32 received <4>hid-core.c: ctrl urb status -32 received <4>hid-core.c: ctrl urb status -32 received <6>input,hiddev0: USB HID v1.01 Mouse [AIPTEK APT-6000U] on usb-00:11.3-1 <4>FAT: Using codepage cp437 <4>HPFS: filesystem error: improperly stopped; remounting read-only <4>HPFS: filesystem error: improperly stopped; remounting read-only <4>FAT: Using codepage cp437 <4>FAT: Using codepage cp437 <6>NTFS volume version 1.2. Kernel logging (ksyslog) stopped. Kernel log daemon terminating.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |