[lkml]   [2002]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.4.18 AND Geode GX1/200Mhz problem
Alan Cox wrote:
> > I have a strange problem with a Geode/GX1 200Mhz based system. My
> > kernel is compiled with 586 as processor type but the system stops just
> > after the 'Uncompressing Linux...Ok, booting the kernel' message. It's
> > strange as GX1 is claimed to work fine with 2.4.18. The same system
> > works fine with 2.2.18 kernel.
> With 586 and no TSC set it should work fine yes. You might want to plug a
> serial port in and compile with serial console enabled, see if it gives any
> clues

I want to translate this to:

Processor -> 586/K5/5x86/6x86/6x86MX

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:25    [W:0.061 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site