lkml.org 
[lkml]   [2002]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.4.18 AND Geode GX1/200Mhz problem
Date
From
> 	I have a strange problem with a Geode/GX1 200Mhz based system. My
> kernel is compiled with 586 as processor type but the system stops just
> after the 'Uncompressing Linux...Ok, booting the kernel' message. It's
> strange as GX1 is claimed to work fine with 2.4.18. The same system
> works fine with 2.2.18 kernel.

With 586 and no TSC set it should work fine yes. You might want to plug a
serial port in and compile with serial console enabled, see if it gives any
clues
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.089 / U:1.288 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site