Messages in this thread | | | Subject | PROBLEM: Kernel does not boot with Machine Check Exeption | Date | Fri, 15 Mar 2002 12:15:18 +0100 (CET) | From | darktim@darktim ... |
| |
Hello.
After I have upgraded mey Kernel from 2.4.19-pre2-ac4 to 2.4.19-pre3 the machine hangs while checking the CPU.
The last message on the screen was:
CPU: L1 I cache: 16k, L1 D cache: 16k CPU: L2 cache: 512k Intel machine check architecture supported
After that the system hangs.
After unchecking /Processor type and features/Machine Check Exeption and recompiling the kernel the machine boots normally.
System is debian_sid on IBM Thinkpad 600
I hope you have enough information to handle this report.
Kindest regards, Andre Timmermann
Additional info:
/proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 5 model name : Pentium II (Deschutes) stepping : 0 cpu MHz : 265.272 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 529.20
-----
lspci -vvv:
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (AGP disabled) (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 64 Region 0: Memory at <unassigned> (32-bit, prefetchable) [size=256M]
00:02.0 CardBus bridge: Texas Instruments PCI1250 (rev 02) Subsystem: IBM: Unknown device 0092 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 20301000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=03, sec-latency=176 Memory window 0: 10000000-103ff000 (prefetchable) Memory window 1: 10400000-107ff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:02.1 CardBus bridge: Texas Instruments PCI1250 (rev 02) Subsystem: IBM: Unknown device 0092 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 08 Interrupt: pin B routed to IRQ 11 Region 0: Memory at 20300000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=04, subordinate=06, sec-latency=176 Memory window 0: 10800000-10bff000 (prefetchable) Memory window 1: 10c00000-10fff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:03.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) (prog-if 00 [VGA]) Subsystem: IBM MagicGraph 128XD Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (4000ns min, 63750ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at 20000000 (32-bit, non-prefetchable) [size=2M] Region 2: Memory at 20200000 (32-bit, non-prefetchable) [size=1M]
00:07.0 Bridge: Intel Corp. 82371AB PIIX4 ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at fcf0 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 48 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at 8400 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 01) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
-----
ver_linux: Linux schleppi666 2.4.19-pre3 #3 Fri Mar 15 11:03:48 CET 2002 i686 unknown Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.13 e2fsprogs 1.27 pcmcia-cs 3.1.33 PPP 2.4.1 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0.11 Modules Loaded 3c589_cs nls_iso8859-1 nls_cp437
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |