Messages in this thread | | | From | Adam Schrotenboer <> | Subject | [Repost] Tulip Bug ? | Date | Wed, 13 Mar 2002 15:35:30 -0500 |
| |
(I can't tell if it made its way to the list......)
I also have some more information. This ethdev is connected to a Efficient Networks Speedstream 5260, which may be the cause of the problems (the modem came w/ a D-Link RTL8139C ethdev, but I replaced both of my ethdevs w/ tulips.) Maybe I need to find out how to program the EEPROM for 10Mbps half duplex ?????
I am currently running 2.4.18-pre9-mjc2, but this also happens w/ 2.4.18-pre9 (and 2.4.18-pre7-mjc, maybe others)
I am getting NETDEV Watchdog timeouts
Mar 13 02:12:54 tabriel kernel: NETDEV WATCHDOG: eth1: transmit timed out Mar 13 02:12:54 tabriel kernel: eth1: 21140 transmit timed out, status fc665410, SIA fffffeff ffffffff 1c09fdc0 fffffec8, resetting... Mar 13 02:12:54 tabriel kernel: eth1: transmit timed out, switching to 100baseTx-FDX media. Mar 13 02:13:02 tabriel kernel: NETDEV WATCHDOG: eth1: transmit timed out Mar 13 02:13:02 tabriel kernel: eth1: 21140 transmit timed out, status fc665410, SIA fffffe1b ffffffff 1c09fdc0 fffffec8, resetting... Mar 13 02:13:02 tabriel kernel: eth1: transmit timed out, switching to 10baseT media. Mar 13 02:13:34 tabriel kernel: NETDEV WATCHDOG: eth1: transmit timed out Mar 13 02:13:34 tabriel kernel: eth1: 21140 transmit timed out, status fc665410, SIA fffffe0b ffffffff 1c09fdc0 fffffec8, resetting... Mar 13 02:13:34 tabriel kernel: eth1: transmit timed out, switching to 100baseTx-FDX media.
I have been getting this at largely unpredictable intervals. The solutions seems to be to ifdown the ethdevs, and rmmod the driver. then ifup the ethdevs (which also means I have to stop my PPPoE-DSL connection).
eth1, the dev that is timing out is not sharing its interrupt. These boards are/were marketed under the brand name SVEC. I cannot find the box they came in at the moment, so don't have the model number.
Just for reference, here's the relevant lines from lspci -vv
00:09.0 Ethernet controller: Macronix, Inc. [MXIC] MX98713 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at e400 [size=256] Region 1: Memory at e0100000 (32-bit, non-prefetchable) [size=256] Expansion ROM at de000000 [disabled] [size=64K]
00:0c.0 Ethernet controller: Macronix, Inc. [MXIC] MX98713 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at e0102000 (32-bit, non-prefetchable) [size=256] Expansion ROM at df000000 [disabled] [size=64K]
TIA -- tabris.net
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |