Messages in this thread | | | Date | Mon, 11 Mar 2002 15:15:46 +0100 | From | Fabian Lienert <> | Subject | PROBLEM: kernel crash initializing ide |
| |
Kernels higher than version 2.4.5 crash when starting the ide part on an Maxdata Artist P-III 733 MHz.
Every kernel with greater version than 2.4.5 I tried, self-compiled or as a debian-packet crashed on my Maxdata Artist P-III 733 MHz with an ide-harddisk and a ide-dvdrom. So I downgraded to kernel 2.4.5, this is working. I tried version 2.4.7, 2.4.10, 2.4.16 and 2.4.18, everywhere the same problem, the kernel crashes. the output:
-----------
Linux version 2.4.5 (root@jesusmaria) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 SMP Wed Feb 27 10:10:51 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 4096 bytes. On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. mapped APIC to ffffe000 (01443000) Kernel command line: BOOT_IMAGE=linux-reiser ro root=306 apm=power-off Initializing CPU#0 Detected 733.355 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1461.45 BogoMIPS Memory: 255096k/262144k available (1285k kernel code, 6660k reserved, 488k data, 192k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 731.61 usecs. SMP motherboard not detected. Using dummy APIC emulation. Setting commenced=1, go go go PCI: PCI BIOS revision 2.10 entry at 0xfb0b0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: queued sectors max/low 169474kB/56491kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later
--------- at this point it crashes.
$ lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) 00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 20) 00:0e.0 SCSI storage controller: Adaptec AIC-7881U 00:10.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) 01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15)
$ lsmod Module Size Used by via82cxxx_audio 17056 1 ac97_codec 8608 0 [via82cxxx_audio] soundcore 4196 2 [via82cxxx_audio]
Hope I send this to the right list.
Regards, -- Fabian Lienert . mitLinks AG . Limmatstrasse 291 . 8005 Z?rich lienert@mitlinks.ch . ++41 1 444 10 44 . http://www.mitlinks.ch pgp public key: http://www.mitlinks.ch/keys/lienert.asc
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |