lkml.org 
[lkml]   [2002]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe:hanging system
Manish Lachwani wrote:

> I had found problems when using burnk6 on the CPUs. After running
> burnk6 for severl hrs, the CPUs used to get underclocked on bootup. I
> had also noticed occasional hangs on such CPUs
>

Well, burnK7 crashes this system pretty easily (few minutes). I also
get "254" error codes from it which apparently indicate an
"integer/memory error".

I've been trying to run "sensors" (from lm_sensors) to see if I can see
and voltage or temp issues while burnK7 is running, but I'm skeptical
that the temp readings are correct as they aren't moving much.

- Orion



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:31    [W:0.022 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site