lkml.org 
[lkml]   [2002]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: IO-APIC on SiS P4 messes interrupts
From
Date
On Tue, 2002-11-26 at 12:21, devik wrote: 
> I used two MSI 8533 mobos for our 1U rack servers.
> These mobos are for P4 and uses SiS 5513 chipset.
> They have integrated VGA and NIC (RTL8139).
>
> When I boot 2.4.19 or 2.4.20rc2 with IO-APIC enabled
> the NIC doesn't work. It get IRQ 18 (instead of
> IRQ 11 in non-ioapic mode) but IRQ routing is bad
> because it got no irqs at that line.

SiS IO-APICs are not supported currently. Ollie at SiS kindly provided
the relevant information to fix that so I hope to have support included
soon.

For uniprocessors just skip using the apic

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:31    [W:0.218 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site