lkml.org 
[lkml]   [2002]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH] x86 BIOS Enhanced Disk Drive services
Linus, please do a

bk pull http://mdomsch.bkbits.net/linux-2.5-edd-tolinus

This will update the following files:

Documentation/i386/zero-page.txt | 2
arch/i386/Config.help | 8
arch/i386/boot/setup.S | 47 +
arch/i386/config.in | 4
arch/i386/defconfig | 1
arch/i386/kernel/Makefile | 1
arch/i386/kernel/edd.c | 984 +++++++++++++++++++++++++++++++++++++++
arch/i386/kernel/i386_ksyms.c | 6
arch/i386/kernel/setup.c | 18
include/asm-i386/edd.h | 168 ++++++
include/asm-i386/setup.h | 2
11 files changed, 1241 insertions

through these ChangeSets:

<Matt_Domsch@dell.com> (02/10/09 1.714.7.1)
EDD: x86 BIOS Enhanced Disk Drive support

The major changes implemented in this patch:
arch/i386/boot/setup.S - int13 real mode calls store results in empty_zero_page
arch/i386/kernel/setup.c - copy results from empty_zero_page to local storage
arch/i386/kernel/edd.c - module exports results via driverfs

x86 systems suffer from a disconnect between what BIOS believes is the
boot disk, and what Linux thinks BIOS thinks is the boot disk. This
manifests itself in multi-disk systems - it's quite possible to
install a distribution, only to fail on reboot - the disk installed to
is not the disk BIOS is booting from. Dell restricts our possible
standard factory installed Linux offerings to "disks on no more than
one controller" to avoid this problem, but mechanisms now exist to
solve it and allow such configurations.

BIOS Enhanced Disk Device Services (EDD) 3.0 provides the ability for
disk adapter BIOSs to tell the OS what it believes is the boot disk.
While this isn't widely implemented in BIOSs yet, it's time that Linux
received support to be ready as BIOSs with this feature do become
available. At a minimum, LSI MegaRAID cards support this today.

EDD works by providing the bus (PCI, PCI-X, ISA, InfiniBand, PCI
Express, or HyperTransport) location (e.g. PCI 02:01.0) and interface
(ATAPI, ATA, SCSI, USB, 1394, FibreChannel, I2O, RAID, SATA) location
(e.g. SCSI ID 5 LUN 0) information for each BIOS int13 device.

The patch below creates CONFIG_EDD, that when defined, makes the
BIOS int13 calls to retrieve and store this information. The data is
copied to a safe place in setup.c, and exported via driverfs.

Here's a sample driverfs tree with two BIOS int13 devices - dev 80 has
incorrect PCI bus information, thus no symlinks are made, but as much
info as possible is presented. Dev 81 has correct PCI and SCSI
information, thus symlinks are made to the actual disc device.

/driverfs
|-- bios
| |-- int13_dev80
| | |-- extensions
| | |-- host_bus
| | |-- info_flags
| | |-- interface
| | |-- raw_data
| | |-- sectors
| | `-- version
| `-- int13_dev81
| |-- extensions
| |-- host_bus
| |-- info_flags
| |-- interface
| |-- pci_dev -> ../../root/pci2/02:0c.0/03:00.0/04:00.0
| |-- raw_data
| |-- disc -> ../../root/pci2/02:0c.0/03:00.0/04:00.0/scsi4/4:0:0:0
| |-- sectors
| `-- version
|-- bus
| |-- scsi
| | |-- devices
| | | |-- 4:0:0:0 -> ../../../root/pci2/02:0c.0/03:00.0/04:00.0/scsi4/4:0:0:0
`-- root
|-- pci2
| |-- 02:0c.0
| | |-- 03:00.0
| | | |-- 04:00.0
| | | | `-- scsi4
| | | | |-- 4:0:0:0



(Yes, the 'bios' top-level directory isn't the right place,
and Patrick has promised to make something there in the future,
at which point this can be moved.)

The 'raw_data' file contains the full set of information returned by BIOS
with extra error reporting. This exists for vendor BIOS debugging purposes.

The 'host-bus' file contains the PCI (or ISA, HyperTransport, ...)
identifying information, as BIOS knows it.

The 'interface' file contains the SCSI (or IDE, USB, ...) identifying
information, as BIOS knows it.

The 'extensions' file lists the BIOS EDD extensions per spec.
The 'info_flags' file lists the BIOS EDD device information flags per spec.
The 'sectors' file reports the number of sectors BIOS believes this
device has.
The 'version' file lists the EDD version. To have device path
information, this must be 0x30 or above. Earlier EDD versions exist
without the device path - as much information as is available is presented.

At most 6 BIOS devices are reported, as that fills the space that's
left in the empty_zero_page. In general you only care about device
80h, though for software RAID1 knowing what 81h is might be useful also.



Known issues:
- module unload leaves a directory around. Seems related to
creating symlinks in that directory. Seen on kernel 2.5.41.
- refcounting of struct device objects could be improved.

TODO:
- Add IDE and USB disk device support
- when driverfs model of discs and partitions changes,
update symlink accordingly.
- Get symlink creator helper functions exported from
drivers/base instead of duplicating them here.
- move edd.[ch] to better locations if/when one is decided

I'd also like to acknowledge the help and comments received from Greg
KH and Patrick Mochel. This isn't something driverfs was originally
conceived to handle, their assistance has been invaluable.

Also available as a patch (against 2.5.41+BK-current):
http://domsch.com/linux/edd30/edd-driverfs-6.patch
http://domsch.com/linux/edd30/edd-driverfs-6.patch.sign

Thanks,
Matt

--
Matt Domsch
Sr. Software Engineer, Lead Engineer, Architect
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.029 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site