Messages in this thread |  | | Date | Mon, 17 Sep 2001 23:33:17 +0100 (IST) | From | Dave Airlie <> | Subject | IRQ detection and VIA chipset.. |
| |
okay I've looked on the list archives and can see reports but not much in the way of happy finishes..
attached are my dmesg and lspci -v.. it is a 2.4.9-ac10 just my own initials to distinguish different modules and stuff... it does something similiar with 2.4.3-20mdk gives
PCI: Found IRQ 5 for device 00:0a.0 IRQ routing conflict in pirq table for device 00:0a.0
I've tried both PNP Bios on and off and also ACPI on and off (just in case).. so should I do the DEBUG define stuff in pci-irq.c or has this been resolved and I'm doing something wrong..
Regards, Dave. p.s. can't get me VAX to boot until I get second netcard working :-)
Linux version 2.4.9-ac10-da2 (root@asimov) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release / Linux-Mandrake 8.0)) #1 Sun Sep 16 22:37:19 IST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000004000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 16384 zone(0): 4096 pages. zone(1): 12288 pages. zone(2): 0 pages. No local APIC present or hardware disabled Kernel command line: BOOT_IMAGE=linux ro root=308 Initializing CPU#0 Detected 400.922 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 799.53 BogoMIPS Memory: 62732k/65536k available (722k kernel code, 2416k reserved, 179k data, 188k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002 CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 09 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router VIA [1106/0586] at 00:07.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 41597kB/13865kB, 128 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0x6400-0x6407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x6408-0x640f, BIOS settings: hdc:pio, hdd:DMA hda: IBM-DTTA-351680, ATA DISK drive hdd: CRD-8400B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 33022080 sectors (16907 MB) w/462KiB Cache, CHS=2055/255/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 28M agpgart: Detected Via MVP3 chipset agpgart: AGP aperture is 64M @ 0xe0000000 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding Swap: 72256k swap-space (priority -1) MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 isapnp: Scanning for PnP cards... isapnp: Calling quirk for 01:00 isapnp: SB audio device quirk - increasing port range isapnp: Card 'Creative ViBRA16C PnP' isapnp: 1 Plug & Play card detected total Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... Winbond chip at EFER=0x3f0 key=0x87 devid=fc devrev=21 oldid=8c Winbond chip type 83877TF SMSC Super-IO detection, now testing Ports 2F0, 370 ... 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 16 0x378: readIntrThreshold is 16 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x4b 0x378: ECP settings irq=7 dma=3 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 5 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 11, want irq 5 eth0: RealTek RTL-8029 found at 0x6c00, IRQ 11, 00:C0:DF:EE:29:59. PCI: Found IRQ 10 for device 00:0b.0 eth1: RealTek RTL-8029 found at 0x7000, IRQ 10, 00:C0:DF:EE:0D:B8. Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 sb: Creative ViBRA16C PnP detected sb: ISAPnP reports 'Creative ViBRA16C PnP' at i/o 0x220, irq 7, dma 1, 5 SB 4.13 detected OK (220) sb: 1 Soundblaster PnP card(s) found. usb.c: registered new driver hub uhci.c: USB UHCI at I/O 0x6800, IRQ 9 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: :USB Universal Host Controller Interface driver ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 5 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 11, want irq 5 eth0: RealTek RTL-8029 found at 0x6c00, IRQ 11, 00:C0:DF:EE:29:59. PCI: Found IRQ 10 for device 00:0b.0 eth1: RealTek RTL-8029 found at 0x7000, IRQ 10, 00:C0:DF:EE:0D:B8.
lspci -v:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) Flags: bus master, medium devsel, latency 16 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e4000000-e7ffffff
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47) Subsystem: VIA Technologies, Inc. MVP3 ISA Bridge Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 32 I/O ports at 6400 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at 6800 [size=32]
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) Flags: medium devsel
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) Flags: medium devsel, IRQ 11 I/O ports at 6c00 [size=32]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) Flags: medium devsel, IRQ 10 I/O ports at 7000 [size=32]
01:00.0 VGA compatible controller: 3DLabs Permedia II 2D+3D (rev 01) (prog-if 00 [VGA]) Subsystem: Unknown device 484c:4133 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5 Memory at e6000000 (32-bit, non-prefetchable) [size=128K] Memory at e5800000 (32-bit, non-prefetchable) [size=8M] Memory at e5000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: <available only to root>
-- David Airlie, Software Engineer http://www.skynet.ie/~airlied / airlied@skynet.ie pam_smb / Linux DecStation / Linux VAX / ILUG person
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |