lkml.org 
[lkml]   [2001]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecttulip driver broken in 2.4.4?
Just tried 2.4.4 yesterday and found that my eth1 was dead after 5 minutes.
The log says:

Apr 30 10:30:59 fluke kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 30 10:30:59 fluke kernel: eth1: Transmit timed out, status fc664010, CSR12 00000000, resetting...
Apr 30 10:31:07 fluke kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 30 10:31:07 fluke kernel: eth1: Transmit timed out, status fc664010, CSR12 00000000, resetting...
... and so on repeatedly ...

I had to ifdown-ifup cycle to re-enable it but it's dead again after 5
minutes with the same problem. The card is LinkSys LNE100TX v4.1. It is
currently working fine with 2.2.18. If there's any other info that is needed
please let me know.

Ronny
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.056 / U:17.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site