lkml.org 
[lkml]   [2001]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Zero Copy IO
Douglas Gilbert wrote:

> "Alex Q Chen" <aqchen@us.ibm.com> wrote:
>
> > I am trying to find a way to pin down user space
> > memory from kernel, so that these user space buffer
> > can be used for direct IO transfer or otherwise
> > known as "zero copying IO". Searching through the
> > Internet and reading comments on various news groups,
> > it would appear that most developers including Linus
> > himself doesn't believe in the benefit of "zero
> > copying IO". Most of the discussion however was based
> > on network card drivers. For certain other drivers
> > such as SCSI Tape driver, which need to handle great
> > deal of data transfer, it would seemed still be more
> > advantageous to enable zero copy IO than copy_from_user()
> > and copy_to_user() all the data. Other OS such as AIX
> > and OS2 have kernel functions that can be used to
> > accomplish such a task. Has any ground work been done
> > in Linux 2.4 to enable "zero copying IO"?
>
> Alex,
> The kiobufs mechanism in the 2.4 series is the appropriate
> tool for avoiding copy_from_user() and copy_to_user().
> The definitive driver is in drivers/char/raw.c which
> does synchronous IO to block devices such as disks
> (but is probably not appropriate for tapes).
>
> The SCSI generic (sg) driver supports direct IO. The driver
> in lk 2.4.3 has the direct IO code commented out while
> a version that I'm currently testing (sg 3.1.18 at
> www.torque.net/sg) has its direct IO code activated. I have
> a web page comparing throughput times and CPU utilizations
> at http://www.torque.net/sg/rbuf_tbl.html . My testing
> indicates that the kiobufs mechanism is now working
> quite well. For various reasons I still think that it
> is best to default to indirect IO and let speed hungry
> users enable dio (which is done in sg via procfs). Even
> when the user selects direct IO is should be possible to
> fall back to indirect IO. [Sg does this when a SCSI
> adapter can't support direct IO (e.g. an ISA adapter).]
>
> Since the SCSI tape (st) driver is structurally similar
> to sg, it should be possible to add direct IO support
> to st.
>
> One thing to note is that when you let the user provide
> the buffer for direct IO (e.g. with malloc) then on
> the i386 it won't be contiguous from a bus address POV.
> This means large scatter gather lists (typically with
> each element 4 KB on i386) which can be time consuming
> to load on some SCSI adapters. One way around this would
> be for a driver to provide "malloc/free" like ioctls.

I'm not very knowledgeable, but doesn't the sound driver
use mmap() to do this? Either way, AGP GART is
basically a paged-MMU allowing non-contiguous phys-mem
to be made to look contiguous from the AGP *and* from PCI
(on most chipsets?). perhaps this would be helpful.

Large contiguous phys-mem seems to be difficult currently,
but would be nice as it would allow use of larger MMU pages
with many cpus. Someone mentioned reverse page table support
would be required first...

>
> Doug Gilbert
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.077 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site