lkml.org 
[lkml]   [2001]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectProblems with a Magik1 chipset board
I own a Iwill KA266 which uses the ALi M1647 northbridge and M1535D+ 
south. I'm getting errors on startup and thought I should see if this
is an issue with the set or kernel 2.4.1

First, during the ALI15X3 starup I get:

PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try
pci=biosirq

according to /proc/pci,00:04.0 is an ALi M5229 IDE (rev 196).

Second, for agpgart I have to use try_agp_unsupported=1 which gets me

agpgart: Trying generic Ali routines for device id: 1647

according to my nvidia driver proc entry, agp is not enabled.

Is there more information I should provide?

Thanks
Dave Pyke

--
No disclaimer shall be read or observed. Any person (either corporate
or individual) making any statement shall be held civily and criminally
liable as a party to any act I may do while following the intentional,
implied or inferred (whether correctly or not) directions from said
statement. So there.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:55    [W:0.140 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site