[lkml]   [2001]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2.4.2-pre3 and 2.4.1-ac9 sound corruption
I've been using vanilla 2.4.1 with no problems, with my soundcard (SB PCI 128 / es1370) sharing IRQ with the USB-controller (this is an Abit KT7-RAID motherboard).
This is what /proc/interrupts tells me:
0: 130808 XT-PIC timer
1: 564 XT-PIC keyboard
2: 0 XT-PIC cascade
7: 12256 XT-PIC usb-uhci, usb-uhci, es1370
10: 503 XT-PIC eth0
11: 2916 XT-PIC ide2, ide3
14: 16 XT-PIC ide0
15: 11 XT-PIC ide1
NMI: 0
ERR: 0
After upgrading to 2.4.2-pre3 I get sound corruption (I believe this problem has existed since pre2, since I suspect the " - driver sync up with Alan" part of the changes in pre2 to be the source of the problem. I've also tried 2.4.1-ac9, which gives me the exact same problems (sound corruption, really "weird" sound).
Hope this is enough info to at least track down some problem if it hasn't been done already.

I'm not subscribed to the linux kernel mailing-list, so please CC to me any follow-ups and I'll do my best to track down the problem if more info about my system/configuration is needed.

Best regards,
Ole André Vadla Ravnås
 \ /
  Last update: 2005-03-22 13:13    [W:0.033 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site