lkml.org 
[lkml]   [2001]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: DMA problem (?) w/ 2.4.6-xfs and ServerWorks OSB4 Chipset
From
On Tue, Nov 13, 2001 at 11:04:57AM +0000, Alan Cox wrote:
> > I am having problems with both UDMA and Multiword DMA. The problem doesn't
> > go away unless I disable CONFIG_IDEDMA_PCI_AUTO.
> >
> > I don't know if there is actual FS corruption with MWord DMA, but there is
> > definitely a "hang" for a few seconds accompanied by a DMA error.
>
> I've no other reports from MWDMA other than the usual "CDROM that doesnt
> handle DMA" things

ops01:~# hdparm -Ii /dev/hda

/dev/hda:

Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSG5S166
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=3(DualPortCache), BuffSize=1916kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=2
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=150136560
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5


Model=BI-MTDAL3-7070 5 , FwRev=XTOA5AC0,
SerialNo= Y DSSY5G1S66
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=3(DualPortCache), BuffSize=1916kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=2
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=150136560
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5

ops01:~# hdparm -Ii /dev/hdb

/dev/hdb:

Model=Maxtor 4W100H6, FwRev=AAH01310, SerialNo=W6H2JCRC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=195711264
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5


Model=aMtxro4 1W006H , FwRev=AA0H3101,
SerialNo=6W2HCJCR
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=195711264
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 mode5

Here is a sample of the I/O errors:

hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220172,
sector=1548794
end_request: I/O error, dev 03:05 (hda), sector 1548794
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220173,
sector=1548795
end_request: I/O error, dev 03:05 (hda), sector 1548795
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220174,
sector=1548796
end_request: I/O error, dev 03:05 (hda), sector 1548796
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220175,
sector=1548797
end_request: I/O error, dev 03:05 (hda), sector 1548797
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=15220176,
sector=1548798
end_request: I/O error, dev 03:05 (hda), sector 1548798

--Adam

--
Adam McKenna <adam@flounder.net> | GPG: 17A4 11F7 5E7E C2E7 08AA
http://flounder.net/publickey.html | 38B0 05D0 8BF7 2C6D 110A
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:18    [W:0.059 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site