lkml.org 
[lkml]   [2000]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectbug in ne.c/isapnp
Hi guys,

Interesting situation. I have a ne2000 ISA card at 0x280 on irq=9 and
here is what I get if I compile both ISAPNP and ne.c statically:

eth1: NE2000 found at 0x280, using IRQ 9.
eth1: interrupt from stopped card
NE*000 ethercard probe at 0x220: 00 48 45 80 6d 38
eth2: NE2000 found at 0x220, using IRQ 5.
ne.c: ISAPnP reports Generic PNP at i/o 0x220, irq 5.

and neither eth1 nor eth2 work. If I compile only ISAPNP statically but
ne.c as a module then it finds ne at 0x280 on irq=9 and works. But
sometimes it finds it on 0x220 on irq=5 and still works. Strange.

Probably I need to run the DOS pnp ne2000 config utility and set the card
in Jumperless mode...

Regards,
Tigran


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.054 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site