lkml.org 
[lkml]   [2000]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.4.0-test6: PCI probe/config problem?
Date
2.4.0-test5 works fine, but here's what I get when I try 2.4.0-test6 on
a Dell Latitude CPx:

(...)
PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [8086/1234] at 00:07.0
PCI: Error while updating region 00:03.0/1 (10000000 != 220000a0)
PCI: Error while updating region 00:03.1/1 (10001000 != 020000a0)
(...)
Linux PCMCIA Card Services 3.1.20
kernel build: 2.4.0-test6 #1 Thu Aug 10 17:32:03 CDT 2000
options: [pci] [cardbus] [apm]
Intel PCIC probe:
Bridge register mapping failed: check cb_mem_base setting
not found.
ds: no socket drivers loaded!

The "PCI:" lines are identical for a 2.4.0-test5 boot except that
the "Error" lines don't show up: the CardBus bridge is at the
expected 0x10000000 and 0x10001000 addresses.

Any idea what's going on here?

--
Bob Tracy
rct@wlk.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.561 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site