lkml.org 
[lkml]   [2000]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectBug ? PCMCIA / CardBus on Toshiba 4090CDS Laptop - 2.4.0-test6
Date
At work i have a Toshiba 4090CDS Laptop with a single ethernet card (uses
8390 module i think). I have no other cards. Using kernel 2.4.0-test4 and
all previous, i can boot the machine and it will detect the card if it is
plugged into either of the 2 slots (0 or 1). However, with 2.4.0-test6 (and
maybe test5 not tested fully yet but can do) the card only gets detected if
it is instaled in slot 0. It does not make any difference if you boot with
the card in place or put it in after booting.

Might be interesting to someone !

Lee Mitchell
www.spamtastic.demon.co.uk
lee@spamtastic.demon.co.uk


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.219 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site