Messages in this thread | | | Date | Sun, 05 Mar 2000 22:31:40 -0800 | From | "Jack (Butch) Griffin" <> | Subject | SCSI Messages |
| |
I am getting some new SCSI messages with the newer 2.3 kernels. I also changed from IBM drives to the two Western Digital drives so that may have something to do with this. These drivers seem to work just fine under 2.2.9, but under 2.3.49 I get these messages and the SCSI bus hangs for periods of up to 30 seconds. Any ideas ?
Thanks Jack Griffin
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 0/20/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 392 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4 <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> scsi : 1 host. (scsi0:0:0:0) invalid cur_addr:0x199947f during WIDE_RESIDUE (scsi0:0:0:0) sg_address[-1]:0x1999380 sg_length[-1]:255 (scsi0:0:0:0) sg_address:0x0 sg_length:0 (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31. (scsi0:0:0:0) invalid cur_addr:0x199947f during WIDE_RESIDUE (scsi0:0:0:0) sg_address[-1]:0x1999380 sg_length[-1]:255 (scsi0:0:0:0) sg_address:0x0 sg_length:0 (scsi0:0:0:0) invalid cur_addr:0x1ffe7fa4 during WIDE_RESIDUE (scsi0:0:0:0) sg_address[-1]:0x1ffe7ea4 sg_length[-1]:256 (scsi0:0:0:0) sg_address:0x0 sg_length:0 Vendor: WDIGTL Model: WDE18310 ULTRA2 Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:0:1:0) invalid cur_addr:0x19996bf during WIDE_RESIDUE (scsi0:0:1:0) sg_address[-1]:0x19995c0 sg_length[-1]:255 (scsi0:0:1:0) sg_address:0x0 sg_length:0 (scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31. (scsi0:0:1:0) invalid cur_addr:0x19996bf during WIDE_RESIDUE (scsi0:0:1:0) sg_address[-1]:0x19995c0 sg_length[-1]:255 (scsi0:0:1:0) sg_address:0x0 sg_length:0 (scsi0:0:1:0) invalid cur_addr:0x1ffe7fa4 during WIDE_RESIDUE (scsi0:0:1:0) sg_address[-1]:0x1ffe7ea4 sg_length[-1]:256 (scsi0:0:1:0) sg_address:0x0 sg_length:0 Vendor: WDIGTL Model: WDE18310 ULTRA2 Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 scsi : detected 2 SCSI disks total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 35761710 [17461 MB] [17.5 GB] sda: sda1 sda2 SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35761710 [17461 MB] [17.5 GB] sdb: sdb1 sdb2 < sdb5 >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |