Messages in this thread | | | From | "Stefan Goerres" <> | Subject | error msgs while using DAT drive | Date | Fri, 18 Feb 2000 17:35:55 +0100 |
| |
Hello everybody,
well I'm trying to get a HP 1533C drive workingbut it is not doing what it is supposed to do :( I'm getting errormsgs while I try to red or write to the device no matter which tool I use. Here a part of the /var/log/warn
Feb 5 12:14:26 lnx kernel: st0: Error with sense data: Info fld=0x7000, Current st09:00: sns = f0 3 Feb 5 12:14:26 lnx kernel: ASC=11 ASCQ= 0 Feb 5 12:14:26 lnx kernel: Raw sense data:0xf0 0x00 0x03 0x00 0x00 0x70 0x00 0x0e 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 Feb 5 12:22:04 lnx kernel: st0: Error with sense data: [valid=0] Info fld=0x0, Deferred st09:00: sns = 71 4 Feb 5 12:22:04 lnx kernel: ASC= 9 ASCQ= 0 Feb 5 12:22:04 lnx kernel: Raw sense data:0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00 0x09 0x00 0x01 0x00 Feb 5 12:22:04 lnx kernel: st0: Error on write filemark. Feb 5 12:28:06 lnx kernel: st0: Error with sense data: [valid=0] Info fld=0x0, Deferred st09:00: sns = 71 3 Feb 5 12:28:06 lnx kernel: ASC= 9 ASCQ= 0 Feb 5 12:28:06 lnx kernel: Raw sense data:0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00 0x09 0x00 0x02 0x00 Feb 5 14:01:46 lnx kernel: st0: Error with sense data: [valid=0] Info fld=0x0, Deferred st09:00: sns = 71 3 Feb 5 14:01:46 lnx kernel: ASC= 9 ASCQ= 0 Feb 5 14:01:46 lnx kernel: Raw sense data:0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00 0x09 0x00 0x02 0x00
Can anybody explain this to me? Is this a drive problem or a controller problem? The controller is a very early NCR53c810 PCI controller. I'm a little confused about the diffrent drivers in the kernel sources and the help files with them. The newer driver never dectected the card and the older one has an I/O option to tweak that changed nothing. So where to go from ?
Any ideas? Or is the drive really faulty? It's cleaned and has a new firmware ... looking like this in /proc/scsi/scsi
Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: HP Model: C1533A Rev: 9608 Type: Sequential-Access ANSI SCSI revision: 02
Are there known troubles with this controller?
Any ideas are welcome!
Thanks in advance
Steve
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |