Messages in this thread | | | Date | Mon, 27 Sep 1999 16:35:01 -0700 (PDT) | From | Perry Wagle <> | Subject | Re: Castlewood EIDE *removable* disk vs 2.2.5 |
| |
>> hdc: CASTLEWOOD ORB2-E, ATA DISK drive > It reports itself as a fixed drive. Tell Castlewood to fix it. If it supports > media changes it is not an ATA fixed disk drive.
What should it report? (I can argue with them better if I have a suggestion)
-- Perry
PS. Without a disk inserted, the drive reports:
# /sbin/hdparm -i /dev/hdc
/dev/hdc:
Model=CASTLEWOOD ORB2-E, FwRev=USR-3.85, SerialNo=19G04A06 Config={ Fixed } RawCHS=4273/16/63, TrkSize=0, SectSize=0, ECCbytes=38 BuffType=0(?), BuffSize=0kB, MaxMultSect=16, MultSect=off DblWordIO=no, maxPIO=240(?), DMA=yes, maxDMA=0(slow) CurCHS=4273/16/63, CurSects=-1192230847, LBA=yes, LBAsects=4307184 tDMA={min:120,rec:120}, DMA modes: *mword2 IORDY=yes, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |