Messages in this thread | | | Date | Mon, 20 Sep 1999 00:30:18 -0500 (CDT) | From | Thomas Molina <> | Subject | Multiple detection of tulip cards in 2.3.18ac6 |
| |
output from dmesg enclosed. Note how the first few messages I'm used to seeing about eth0 detection seem to be missing, compared to eth1. There are only two ethernet cards in the system. The first is a "Boomerang" and the second is a standard tulip clone. I thought this had been discussed before, but I couldn't find the messages in the kernel archives.
Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 00:10:4b:b3:8a:92, IRQ 11 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10baseT interface. Enabling bus-master transmits and whole-frame receives. 3c59x.c:v0.99M 9/3/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth1: Digital DC21041 Tulip rev 33 at 0xc480e000, 00:C0:F0:37:22:56, IRQ 11. eth1: 21041 Media table, default media 0800 (Autosense). eth1: 21041 media #0, 10baseT. eth1: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov eth2: Digital DC21041 Tulip rev 33 at 0xc4810000, 00:C0:F0:37:22:56, IRQ 11. eth2: 21041 Media table, default media 0800 (Autosense). eth2: 21041 media #0, 10baseT. eth2: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov eth3: Digital DC21041 Tulip rev 33 at 0xc4812000, 00:C0:F0:37:22:56, IRQ 11. eth3: 21041 Media table, default media 0800 (Autosense). eth3: 21041 media #0, 10baseT. eth3: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov eth4: Digital DC21041 Tulip rev 33 at 0xc4814000, 00:C0:F0:37:22:56, IRQ 11. eth4: 21041 Media table, default media 0800 (Autosense). eth4: 21041 media #0, 10baseT. eth4: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov eth5: Digital DC21041 Tulip rev 33 at 0xc4816000, 00:C0:F0:37:22:56, IRQ 11. eth5: 21041 Media table, default media 0800 (Autosense). eth5: 21041 media #0, 10baseT. eth5: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov eth6: Digital DC21041 Tulip rev 33 at 0xc4818000, 00:C0:F0:37:22:56, IRQ 11. eth6: 21041 Media table, default media 0800 (Autosense). eth6: 21041 media #0, 10baseT. eth6: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov eth7: Digital DC21041 Tulip rev 33 at 0xc481a000, 00:C0:F0:37:22:56, IRQ 11. eth7: 21041 Media table, default media 0800 (Autosense). eth7: 21041 media #0, 10baseT. eth7: 21041 media #4, 10baseT-FD. tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 > VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 60k freed Adding Swap: 72256k swap-space (priority -1)
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |