Messages in this thread | | | From | Bruno Semrau <> | Date | Sat, 11 Sep 1999 20:24:55 +0200 (CEST) | Subject | Problem with Acard SCSI and kernel 2.2.x |
| |
Hello, kernel 2.2.x, 2,3,x doesn't detect my CD-R Writer. Under Kernel 2.0.36 - 38, or Win95 it works fine.
boot.msg ------------------ cut ---------------------- <4>aec671x_detect:
<4> ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:6400, IRQ:10. <4> ID: 6 MATSHITACD-R CW-7502 3.02 <4> ID: 7 Host Adapter <4>scsi0 : ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0
<4>scsi : 1 host. <4>scsi0 channel 0 : resetting for second half of retries. <4>SCSI bus is being reset for host 0 channel 0. <4>scsi : detected total. ^^^^^^^^^^^^^^^^^ ------------------ cut ----------------------
here is my hardware:
Board: Biostar M5AT Prozessor: AMD K6 233 Mhz Sound: Terratec Maestro 32/96 Grafik: Biostar Voodoo Rush Scsi: Acard SCSI AEC6710u (atp870u) CD Brenner: MATSHITACD-R CW-7502 3.02 Netz: ne2000 Isa
command #echo "scsi add-single-device 0 0 6 0" >/proc/scsi/scsi doesn't work
# cat /proc/scsi/scsi Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: h Model: \ =3D Rev: Type: Sequential-Access ANSI SCSI revision: 01 =
a try with cdrecord: #cdrecord -scanbus Cdrecord release 1.6.1 Copyright (C) 1995-1998 J=F6rg Schilling cdrecord: Cannot open SCSI driver.
#lsmod Module Size Used by sd_mod 15580 0 (unused) atp870u 47568 0 (autoclean) (unused) sg 11768 0 (autoclean) (unused) scsi_mod 51120 3 (autoclean) [sd_mod atp870u sg] ne 6512 1 (autoclean) 8390 6084 0 (autoclean) [ne] serial 18324 1 (autoclean) =
sorry for my bad english :( thx Bruno
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |