[lkml]   [1999]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectPIIX bug report

    I just tried to boot 2.3.6 (I have used 2.3.5 with no problems) and it
    seems that there is a problem with the PIIX code. Here's the relevant
    fragment from booting sequence:

    Uniform Multi-Platform E-IDE driver Revision: 6.19
    PIIX4: IDE controller on PCI bus 00 dev 39
    PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    hda: ST31277A, ATA DISK drive
    hdb: CRD-8320B, ATAPI CDROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: set_geometry_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: set_geometry_intr: error=0x04 { DriveStatusError }
    hda: ST31277A, 1221MB w/0kB Cache, CHS=620/64/63
    hdb: ATAPI 32X CD-ROM drive, 128kB Cache
    Uniform CDROM driver Revision: 2.55
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    Partition check:
    hda: hda1 hda2 hda3
    VFS: Mounted root (ext2 filesystem) readonly.
    init: error in loading shared libraries: failed to map
    segment from shared object: Cannot allocate memory

    If you need more information I'm wiling to do more tests and see what's

    PS: please CC me because I'm not subscribed

    If you understand what you're doing, you're not learning anything.

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:52    [W:0.019 / U:2.632 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site