lkml.org 
[lkml]   [1999]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectTraffic shaper stops my machine
Hi

I was encounterd a problem using traffic shaper. When i tries shape
ethernet interface(eth4) to speed 14400 my machine just stops
after ~10 of working(without any oops or other error message, simply not
responding). I'm using linux 2.2.1 on 486sx33 working as router with five
ethernet interfaces. There is my comands to start shaping:

shapecfg attach shaper0 eth4
shapecfg speed 14400 eth4
ifconfig shaper0 my.ip.add.ress netmask 255.255.255.0 broadcast
bro.ad.ca.st up
route add -net my.net.wo.rk netmask 255.255.255.0 dev dhaper0


Denis Chapligin


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.025 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site