lkml.org 
[lkml]   [1999]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.2.0pre7ac7/pre8ac1, writing to /dev/sg? from XCDRoast
Hi -

When I start XCDroast 0.96e under kernel versions 2.2.0pre7ac7 or pre8ac1, it
hangs when it writes to /dev/sg1 after opening it O_RDWR:

open("/dev/sg0", O_RDWR) = 4
write(4, "*\0\0\0\204\0\0\0\0\0\0\0\0\0\0\0"..., 42) = 42
read(4, "\204\0\0\0\204\0\0\0\0\0\0\0\0\0"..., 132) = 132
close(4) = 0
open("/dev/sg1", O_RDWR) = 4
write(4, "*\0\0\0\204\0\0\0\0\0\0\0\0\0\0\0"..., 42

It's trying to probe attached SCSI devices by sending SCSI Inquiry commands.

It used to work OK on pre7ac4 at least (maybe later versions too...)

Any idea what's up? XCDroast problem or kernel booboo?

[root@cocoa /root]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: D.09
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: MITSUMI Model: CR-4801TE Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02

The Mitsumi device is an ATAPI device on hdc using ide-scsi.

Best Regards,
Alex.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.020 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site