Messages in this thread | | | Date | Thu, 21 Jan 1999 09:28:49 -0800 | From | Thomas Davis <> | Subject | Re: Sending a pre8 bug report. |
| |
Forwarded from a friend, who doesn't keep up with the mailing list.
Art Walker wrote: > > Tom - Is there anywhere I can send a bug report for Linux 2.2.0-pre8 > without subscribing to the "linux-kernel" mailing list (which I'm > reluctant to do because of message volume)? > > The bug: > System is a brand new Dell Dimension XPS R450 (P-II/450MHZ, > 128MB RAM, 8GB IDE disk, Internal IDE Zip drive). During > boot, I get the following errors for the Zip drive (which > is set as the slave device on the secondary IDE controller > (i.e. /dev/hdd): > > PIIX4: IDE controller on PCI bus 00 dev 39 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio > hda: Maxtor 90845D4, ATA DISK drive > hdc: NEC CD-ROM DRIVE:28C, ATAPI CDROM drive > hdd: IOMEGA ZIP 100 ATAPI, ATAPI CDROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: Maxtor 90845D4, 8063MB w/256kB Cache, CHS=1027/255/63, UDMA > hdc: ATAPI 32X CDROM drive, 128kB Cache > Uniform CDROM driver Revision: 2.52 > hdd: packet command error: status=0x51 { DriveReady SeekComplete Error } > hdd: packet command error: error=0x50 > ATAPI device hdd: > Error: Illegal request -- (Sense key=0x05) > Invalid field in command packet -- (asc=0x24, ascq=0x00) > The failed "Mode Sense" packet command was: > "5a 00 2a 00 00 00 00 00 18 00 00 00 " > > IDE Floppy support has been compiled into the kernel. Under pre7 and > earlier, I get the following messages: > > PIIX4: IDE controller on PCI bus 00 dev 39 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio > hda: Maxtor 90845D4, ATA DISK drive > hdc: NEC CD-ROM DRIVE:28C, ATAPI CDROM drive > hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: Maxtor 90845D4, 8063MB w/256kB Cache, CHS=1027/255/63, UDMA > hdc: ATAPI 32X CDROM drive, 128kB Cache > Uniform CDROM driver Revision: 2.51 > hdd: 98304kB, 196608 blocks, 512 sector size > hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm > > (Also, in both cases I should point out that there is a disk in the > drive during boot. If I boot pre8 without a disk present, I still > get the same errors.) > > - Art >
-- ------------------------+-------------------------------------------------- Thomas Davis | PDSF Project Leader tadavis@lbl.gov | (510) 486-4524 | "Only a petabyte of data this year?"
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |