Messages in this thread | | | Date | Thu, 21 Jan 1999 07:20:56 +0100 | From | Tim Timmerman <> | Subject | Hardware problems ? |
| |
Hi,
I found the juicy bits below in my kernel log yesterday: I'm not sure whether they represent a hardware or software problem.
The system in question is a Cyrix PR166+, with 80MB Ram, 3 harddisks, running a fairly standard debian hamm.
As far as I can tell, I was recording wav files using gramofile 1.4, and tkmixer. The soundcard in question is a standard soundblaster 16, and it's the only pnp device in the machine.
hdb is my windows and swap device. Haven't checked but I don't think I needed to go into swap at that moment.
Any suggestions as to what I'm looking at here ? A disk about to go boom ? Or is this normal ?
Thanks for any help.
TimT. kern.log:
Jan 18 18:28:28 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 18:28:28 dibbler kernel: hdb: disabled DMA Jan 18 18:28:28 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 18:28:28 dibbler kernel: ide0: reset: success Jan 18 18:28:54 dibbler kernel: Sound: Recording overrun Jan 18 18:39:56 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 18:39:56 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 18:39:56 dibbler kernel: ide0: reset: success Jan 18 18:42:52 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 18:42:52 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 18:42:52 dibbler kernel: ide0: reset: success Jan 18 18:44:28 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 18:44:28 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 18:44:28 dibbler kernel: ide0: reset: success Jan 18 19:56:41 dibbler kernel: Warning: dev (03:02) tty->count(1) != #fd's(2) in do_tty_hangup Jan 18 20:12:32 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 20:12:32 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 20:12:32 dibbler kernel: ide0: reset: success Jan 18 20:14:22 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 20:14:22 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 20:14:22 dibbler kernel: ide0: reset: success Jan 18 20:45:13 dibbler kernel: Warning: dev (03:03) tty->count(1) != #fd's(2) in do_tty_hangup Jan 18 20:54:09 dibbler kernel: hda: status timeout: status=0xd0 { Busy } Jan 18 20:54:09 dibbler kernel: hda: no DRQ after issuing WRITE Jan 18 20:54:09 dibbler kernel: ide0: reset: success
Possibly useful bits from dmesg:
Sound initialization started <Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5 <Sound Blaster 16> at 0x330 irq 5 <Yamaha OPL3 FM> at 0x388 Sound initialization complete ide: i82371 PIIX (Triton) on PCI bus 0 function 57 ide0: BM-DMA at 0xf000-0xf007 ide1: BM-DMA at 0xf008-0xf00f hda: Conner Peripherals 1275MB - CFS1275A, 1219MB w/64kB Cache, CHS=2477/16/63 hdb: Maxtor 7546 AT, 522MB w/256kB Cache, CHS=1060/16/63, DMA hdc: QUANTUM BIGFOOT_CY6480A, 6204MB w/67kB Cache, CHS=13446/15/63 hdd: PHILIPS CDD3610 CD-R/RW, ATAPI CDROM drive - enabling SCSI emulation ATAPI overlap supported: No ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15
---------------------------------------------------------------------------- tim.timmerman@asml.nl Tel: (Int+031)-(0)40-2303613 timt@dibbler.iaehv.nl Voodoo Programmer/Keeper of the Rubber Chicken Diplomacy: saying "Nice doggy" until you can find a rock. ----------------------------------------------------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |