lkml.org 
[lkml]   [1998]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectProblems in SCSI CD-Recording.
	I get timeouts when trying to record a CD using cdrecord, after
Calibrating laser.... I get:

cdrecord: Input/output error. opt_power_judge: scsi sendcmd: retryable
error
CDB: EC 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 07 9C 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x9C Qual 0x00 (opc execution eror) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 3.867s timeout 60s
done.

with 2.1.113 and aic7xxx-5.1.0pre6 it doesn't happen, I'm currently using
2.1.120pre2 and aic7xxx-5.1.0pre8 (it also happens with 5.1.0pre7 and with
2.1.120pre3 and 2.1.120).

The CD is a valid CD, I have been able to record it after
resetting and trying again with cdrecord-1.6.1a3, but this version will
fail if I try to record a second CD (the 1.6 version won't even record the
first)

I have a dual PII 300 (SMP enabled) and an onboard adaptec 2940
(Supermicro P6DLS mainboard), if you have any question ask me.

- German Gomez Garcia
mat006@pinon.ccu.uniovi.es

PS: don't reply directly to this message, reply to
mat006@pinon.ccu.uniovi.es




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/faq.html

\
 
 \ /
  Last update: 2005-03-22 13:44    [W:0.022 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site