lkml.org 
[lkml]   [1998]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectBus master DMA on a dual PPro box
Date
Hi all,

On my dual PPro Linux box (with Tyan S1668 motherboard, with Intel 440FX
chipset), the bus master DMA and/or UltraDMA does not work. I have a WDC 6.4
Gb disk on it (only device on the primary channel).

I tested it with kernel 2.0.34 and 2.1.103. Both wait long at the partition
detection and then reset the bus, telling me the chipset is not fully
Trition 2 compatible. There was also a message about not being able to probe
the interrupts. They are setup as usual (14&15) and not being used by
anaything else, not even the video card.

Can someone give me a hint about how to solve this or what other information
I should give before my problem can be solved? BTW. I already use the latest
bios (5.01) for the board.

Please cc a copy of your answer to me (sgm@stack.nl) as I am not on this
list.

Many thanks in advance,

Bas.

Linux Rules!
(As long as your boss does not want the report in Word97 format)



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html

\
 
 \ /
  Last update: 2005-03-22 13:43    [W:0.059 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site