lkml.org 
[lkml]   [1998]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: TAPE problems with 3.0e of Linux NCR538XX SCSI drivers
| I did enable the feature.  However further testing shows something else,
| presumably hardware problems is going on. I can't access the driver via either
| 2.5f of the NCR53C8XX drivers or the Adaptec 2940UW driver (both of these
| previously worked with the drive, and I didn't do any hardware hacking). So
| now the problem is who fixes DAT drives, and what do they charge :-(

Even curiouser, after switching cables, scsi adapters, etc. for 2 hours, I left
and it still wasn't working, but I left the cover off. At 3am my normal dump
kicked in, and it worked (on Linux 2.1.105). I'm suspecting heat now. I have
an order for an external SCSI case to move the disks off to, to try and lower
the temperture. Sigh....

--
Michael Meissner, Cygnus Solutions (Massachusetts office)
4th floor, 955 Massachusetts Avenue, Cambridge, MA 02139, USA
meissner@cygnus.com, 617-354-5416 (office), 617-354-7161 (fax)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html

\
 
 \ /
  Last update: 2005-03-22 13:43    [W:0.147 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site