Messages in this thread | | | Date | Thu, 2 Apr 1998 14:16:45 +0200 | From | "Dr. Werner Fink" <> | Subject | Re: Strange SB16 clone |
| |
> > Some time ago I bought a cheap SB16 clone (ALS+) and used it > > under linux with the SB16 driver. Under windows it use irc 5 dma1 1 and > > dma2 0 (pretty odd ..). The linux driver only accept values between 5 and 7 > > I have a genuine SB Vibra16 here that behaves similar. Here Windows has settled > on DMA1/DMA3, IRQ5.
ViBRA C PnP? Disable second DAM channel because the card uses a 8bit one (channel 3 and lower) and the free oss driver expects a 16bit (cannel 5 and higher) ... means: second channel should be -1 at `make {x,menu,}config'
Don't forget isapnp setupt with the isapnp tools.
> > > for the second dma and the card doesn't accept 5 6 or 7 as dma2. > > I had to modify the drivers/sound/sb_common.c to allow dma2 to be equal > > to 0 and now everything *looks* like working fine. > > Hmmm strange I tried that too, but when playing a 16Bit Sample I only get a > IRQ/DRQ timeout. Sigh.
Werner
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |