lkml.org 
[lkml]   [1998]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectHELP! every kernel after 2.1.85 locks solid
From
Date
HELP!

Every kernel after 2.1.85 (even 2.1.89-4) locks solid on my Tomcat II
motherbord with the last message stuck on smp_invalidate_needed IPI wait (CPU#0)
no oops or any other messages.
This is an SMP kernel started with pirq=0, but the same happens without
the option as well.
Please help, I am realy puzzled as 2.1.85 works well.

Jacek.


Here is the log from the boot process:
1.3-3: restart.
klogd 1.3-3, log source = /proc/kmsg started.
Loaded 6742 symbols from /boot/System.map.
Symbols match kernel version 2.1.89.
No module symbols loaded.
Linux version 2.1.89 (root@wroclaw.crosskeys.com) (gcc version 2.7.2.3) #5 Sat Feb 28 16:49:24 EST 1998
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) APIC version 17
Processor #1 Pentium(tm) APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
INIT IRQ
PIRQ redirection SETUP, working around broken MP-BIOS.
... PIRQ0 -> IRQ 0
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
PCI: Using configuration type 1
Probing PCI hardware.
PCI->APIC IRQ transform: (B0,I0,P-1) -> -1
PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
PCI->APIC IRQ transform: (B0,I17,P-1) -> -1
PCI->APIC IRQ transform: (B0,I18,P-1) -> -1
PCI->APIC IRQ transform: (B0,I19,P0) -> -1
Calibrating delay loop... 53.04 BogoMIPS
Memory: 30644k/32768k available (1048k kernel co
de, 400k reserved, 624k data, 52k init)
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium 75+ stepping 0c
calibrating APIC timer ...
..... CPU clock speed is 132.7755 MHz.
..... APIC bus clock speed is 66.3875 MHz.
Booting processor 1 eip 2000: Calibrating delay loop... 53.04 BogoMIPS
OK.
CPU1: Intel Pentium 75+ stepping 0c
Total of 2 processors activated (106.09 BogoMIPS).
mapping IO APIC from standard address.
new virtual address: c2804000.
enabling Symmetric IO mode ... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 20, 21, 22, 23 not connected.
..MP-BIOS bug: i8254 timer not connected to IO-APIC
..falling back to 8259A-based timer interrupt
nr of MP irq sources: 21.
nr of IOAPIC registers: 24.
testing the IO APIC.......................
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 0FF 0F 0 0 0 0 0 1 1 69
04 0FF 0F 0 0 0 0 0 1 1 71
05 0FF 0F 0 0 0 0 0 1 1 79
06 0FF 0F 0 0 0 0 0 1 1 81
07 0FF 0F 0 0 0 0 0 1 1 89
08 0FF 0F 0 0 0 0 0 1 1 91
09 0FF 0F 0 0 0 0 0 1 1 99
0a 0FF 0F 0 0 0 0 0 1 1 A1
0b 0FF 0F 0 0 0 0 0 1 1 A9
0c 0FF 0F 0 0 0 0 0 1 1 B1
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 0 0 0 0 0 1 1 C1
0f 0FF 0F 0 0 0 0 0 1 1 C9
10 0FF 0F 0 1 0 1 0 1 1 D1
11 0FF 0F 0 1 0 1 0 1 1 D9
12 0FF 0F 0 1 0 1 0 1 1 E1
13 0FF 0F 0 1 0 1 0 1 1 E9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
.................................... done.
Starting kswapd v 1.5
Serial driver version 4.24 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Sound initialization started
<GUS MAX (CS4231)> at 0x32c dma 3,1
<Gravis UltraSound MAX (1024k)> at 0x220 irq 5 dma 1,3
Sound initialization complete
Uniform CD-ROM driver Revision: 2.12
PIIX3: IDE controller on PCI bus 0 function 57
PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC31600H, ATA DISK drive
hdb: WDC AC2850F, ATA DISK drive
hdc: IRQ probe failed (0)
hdc: IRQ probe failed (0)
hdc: TOSHIBA CD-ROM XM-5402TA, ATAPI CDROM drive
hdc: IRQ probe failed (0)
hdd: IRQ probe failed (0)
hdd: IRQ probe failed (0)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC31600H, 1549MB w/128kB Cache, CHS=787/64/63, DMA
hdb: WDC AC2850F, 814MB w/64kB Cache, CHS=827/32/63
hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: ATAPI reset complete
hdc: irq timeout: status=0x48 { DriveReady DataRequest }
hdc: ATAPI reset complete
hdc: irq timeout: status=0x48 { DriveReady DataRequest }
end_request: I/O error, dev 16:00, sector 0
hdc: ATAPI 152X CDROM drive, 16129kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ncr53c8xx: at PCI bus 0, device 19, function 0
PCI->APIC IRQ transform: (B0,I19,P0) -> 17
ncr53c8xx: 53c875 detected with Symbios NVRAM
ncr53c875-0: rev=0x03, base=0xe2000000, io_port=0x6100, irq=17
ncr53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
ncr53c875-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/0e/a0/01/00/24
ncr53c875-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/a0/00/08/24
ncr53c875-0: on-board RAM at 0xe2001000
ncr53c875-0: on-board ram mapped at virtual address 0xc281f000
ncr53c875-0: requesting shared irq 17 (dev_id=0xc1fe0080)
ncr53c875-0: resetting, command processing suspended for 2 seconds
ncr53c875-0: restart (scsi reset).
ncr53c875-0: enabling clock multiplier
ncr53c875-0: copying script fragments into the on-board RAM ...
scsi0 : ncr53c8xx - revision 2.5f
scsi : 1 host.
ncr53c875-0: command processing resumed
ncr53c875-0-<6,0>: using tagged command queueing, up to 8 cmds/lun
Vendor: QUANTUM Model: XP32275W Rev: LXY4
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI disk total.
ncr53c875-0-<6,0>: WIDE SCSI (16 bit) enabled.
ncr53c875-0-<6,0>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4445380 [2170 MB] [2.2 GB]
PPP: version 2.3.3 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
sda: sda1
hda: hda1 hda2 hda3
hdb: hdb1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
stuck on smp_invalidate_needed IPI wait (CPU#0)
Adding Swap: 129020k swap-space (priority -1)
stuck on smp_invalidate_needed IPI wait (CPU#0)
Adding Swap: 124988k swap-space (priority -2)
stuck on smp_invalidate_needed IPI wait (CPU#0)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:41    [W:0.048 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site