Messages in this thread | | | Date | Sat, 26 Dec 1998 12:41:43 +0000 (GMT) | From | Riley Williams <> | Subject | Linux problems... |
| |
Hi Alan.
I recently obtained an old Toshiba T2110 laptop, which I have now installed RedHat Linux 5.2 on, then upgraded the kernel with kernel*-2.0.36-1.i386.rpm from updates.redhat.com. The spec is 486dx4/75 with 12M of RAM. Here's the output from 'fdisk -l' on it:
Disk /dev/hda: 32 heads, 63 sectors, 787 cylinders Units = cylinders of 2016 * 512 bytes
Device Boot Start End Blocks Id System /dev/hda1 1 305 307408+ b Win95 FAT32 /dev/hda2 * 306 316 11088 83 Linux native /dev/hda3 317 367 51408 82 Linux swap /dev/hda4 368 787 423360 83 Linux native
The first partition is the existing FAT32 partition, successfully shrunk with fips from RH 5.2. Kernel 2.0.36 appears not to be able to access FAT32 partitions, so it's not included in /etc/fstab as a result. Is this correct?
Of the other partitions, /dev/hda2 is mounted on /boot and /dev/hda4 on / with everything else in it. Because the drive is so small, I havenae installed XFree86 - and for what I plan on using the laptop for, that isnae really needed anyway...
The 'monitor' on it is a 640x480x256-grayscale LCD panel, and this is where I became curious: On boot-up in 'vga=ask' mode, LILO indicates that there are SIX separate video modes available, being 80x25, 80x50, 80x43, 80x28, 80x34 and 80x60, all of which can be selected from LILO and the display is correctly set into each of those modes, then the kernel starts booting.
However, part way through the boot-up sequence, the kernel switches the display back into 80x25 mode for some reason...
What I would like to know is whether it's possible to change this behaviour? Also, if so, how?
Best wishes from Riley.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |