Messages in this thread | | | Date | Thu, 05 Nov 1998 21:58:22 +0100 | From | weirdow <> | Subject | Re: timeouts with ncr53c8xx |
| |
Richard Gooch wrote: > > Hans-Frieder Vogt writes: > > from kernel 2.1.127-pre3 (the first I tried) on I get loads of "aborting command > > due to timeout" messages short after switching to synchronous mode FAST-10. > > Were the timings changed in new version 3.1a? Last tried was 2.1.127-pre7. > > Problem still there. > > hw is P100 single processor, NCR53C810 on noname card. > > compiler was gcc 2.8.1 (also tested with egcs-1.1b). > > Yeah, I'm getting much the same behaviour. Same here with a diamond fireport 40 (ncr53c875J) timeouts occured in 2.1.127p3 not in 2.1.126
scsi : aborting command due to timeout : pid 196, scsi0, channel 0, id 0, lun 0 Write (6) 00 01 01 01 00 ncr53c8xx_abort: pid=196 serial_number=208 serial_number_at_timeout=208 scsi : aborting command due to timeout : pid 197, scsi0, channel 0, id 0, lun 0 Write (6) 00 01 04 01 00 ncr53c8xx_abort: pid=197 serial_number=209 serial_number_at_timeout=209 scsi : aborting command due to timeout : pid 199, scsi0, channel 0, id 0, lun 0 Write (6) 00 04 a2 20 00 ncr53c8xx_abort: pid=199 serial_number=211 serial_number_at_timeout=211 SCSI host 0 abort (pid 196) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=196 reset_flags=2 serial_number=208 serial_number_at_timeout=208 ncr53c875J-0: Downloading SCSI SCRIPTS.
SCSI host 0 abort (pid 196) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=196 reset_flags=2 serial_number=216 serial_number_at_timeout=216 ncr53c875J-0: Downloading SCSI SCRIPTS.
drive is an ibm dghs 39110
Jim
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |