lkml.org 
[lkml]   [1998]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectNetwork in 2.0.35 stops working(DEC DC21142) again
The network on a server with kernel 2.0.35 stoped working again. That is
the third time that this happend in the last month. The first two craches
happend with de4x5.c network driver and I did not get any error log. I
changed the network driver to tulip.c(tulip.c:v0.89H 5/23/98) and this
time I got an error message after 8 days uptime. The sytem is a Dual PII
with 400 Mhz running 2.0.35. The load was not very high when it happend
only three students were using it at the time.

I got this message over and over till I restarted the network:

Oct 17 14:51:02 math kernel: eth0: 21140 transmit timed out, status
f00980c7, SIA 000000c4 ffff0001 fffbff7f 8ff0c008, resetting...
Oct 17 14:51:02 math kernel: eth0: transmit timed out, switching to
100baseTx media.
Oct 17 14:51:06 math kernel: eth0: 21140 transmit timed out, status
f80980d7, SIA 000002cb ffff0001 fff87f3d 8ffdc000, resetting...
Oct 17 14:51:06 math kernel: eth0: transmit timed out, switching to
10baseT media.

[cat /proc/pci]
Ethernet controller: DEC DC21142 (rev 48).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
Latency=96. Min Gnt=20.Max Lat=40.
I/O at 0xec00.
Non-prefetchable 32 bit memory at 0xffaffe80.
Bus 0, device 16, function 0:

I hope someone can help me and explain what the error messages mean.

Thanks alot.

Dominik
-----------------------------------------------------------------
"Never look down on anybody unless you helping him up."
-Jesse Jackson



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:45    [W:1.375 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site