[lkml]   [1997]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: LINKSYS EtherPCI LAN Card II
> > > 
> > > I noticed that there is not support for pci ne2000 cards in 2.0.0. Is
> > > there work being done on this? Or does anybody know how to support this
> > > card?
> >
> > There is support for PCI ne2000 cards in v2.0.x but it is limited to
> > the RealTek cards. To use Winbond or Compex PCI clones with v2.0 you
> > need to do one of the following, whichever is easiest for you.
> >
> On my system, the RealTek card isn't autodetected. I have PCI BIOS support
> on, but it seems that my card isn't detected by the driver.
> I have the following line added in /etc/conf.modules:
> options eth0 io=0xe800 irq=11
> Without io= statement, the ne driver does no auto-detection; If I ommit the

Ahh, you didn't say you were using modules. Autodetection with v2.0 is
only at boot. If you want aoutodetection as a module as well, get and use
the patch that I mentioned in my previous mail. Or use v2.1.x (x>=15)


 \ /
  Last update: 2005-03-22 13:38    [W:0.054 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site