[lkml]   [1997]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: LINKSYS EtherPCI LAN Card II
> >
> > I noticed that there is not support for pci ne2000 cards in 2.0.0. Is
> > there work being done on this? Or does anybody know how to support this
> > card?
> There is support for PCI ne2000 cards in v2.0.x but it is limited to
> the RealTek cards. To use Winbond or Compex PCI clones with v2.0 you
> need to do one of the following, whichever is easiest for you.

On my system, the RealTek card isn't autodetected. I have PCI BIOS support
on, but it seems that my card isn't detected by the driver.
I have the following line added in /etc/conf.modules:

options eth0 io=0xe800 irq=11

Without io= statement, the ne driver does no auto-detection; If I ommit the
irq=11 statement, my system hangs. So even for the RealTek card the driver
doesn't do proper autoprobing.


> That should help you get it working.
> Paul.

PGP: Finger for PGP public key, KeyID 3B896721
WWW: (Also PGP public key)

 \ /
  Last update: 2005-03-22 13:38    [W:2.173 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site