Messages in this thread |  | | Date | Tue, 16 Jul 1996 01:39:27 -0400 (EDT) | From | Jon Lewis <> | Subject | More on Lost timer |
| |
Here's a log clipping from the kern.* messages. Can anyone explain why I get bootup messages folloing the Lost timer message...even though the last reboot was nearly a week ago?
Oddly, this doesn't all get into the dmesg output...it only has: Lost timer or fin packet in tcp_fin.<6>ICMP: failed checksum from 205.229.51.144! ICMP: failed checksum from 205.229.51.144!
Jul 16 00:05:56 obi-wan kernel: ICMP redirect from 205.229.48.4 Jul 16 00:15:18 obi-wan kernel: ICMP: failed checksum from 205.229.51.144! Jul 16 00:18:41 obi-wan kernel: Lost timer or fin packet in tcp_fin.1.144! Jul 16 00:18:41 obi-wan kernel: us 2004 Tx FIFO room 1116. Jul 16 00:18:41 obi-wan kernel: ICMP redirect from 205.229.48.4 Jul 16 00:18:41 obi-wan last message repeated 3 times Jul 16 00:18:41 obi-wan kernel: ICMP redirect from 205.229.48.1 Jul 16 00:18:41 obi-wan last message repeated 7 times Jul 16 00:18:41 obi-wan kernel: nux 2.0 Jul 16 00:18:41 obi-wan kernel: NET3: Unix domain sockets 0.12 for Linux NET3.035. Jul 16 00:18:41 obi-wan kernel: Swansea University Computer Society TCP/IP for NET3.034 Jul 16 00:18:41 obi-wan kernel: IP Protocols: IGMP, ICMP, UDP, TCP Jul 16 00:18:41 obi-wan kernel: VFS: Diskquotas version dquot_5.6.0 initialized Jul 16 00:18:41 obi-wan kernel: Jul 16 00:18:41 obi-wan kernel: Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Jul 16 00:18:41 obi-wan kernel: Checking 'hlt' instruction... Ok. Jul 16 00:18:41 obi-wan kernel: Linux version 2.0.4 (root@irc) (gcc version 2.6.3) #5 Mon Jul 8 20:24:28 EDT 1996 Jul 16 00:18:41 obi-wan kernel: Floppy drive(s): fd0 is 1.44M Jul 16 00:18:41 obi-wan kernel: Started kswapd v 1.4.2.2 Jul 16 00:18:41 obi-wan kernel: FDC 0 is a post-1991 82077 Jul 16 00:18:41 obi-wan kernel: ncr53c8xx : at PCI bus 0, device 14, function 0 Jul 16 00:18:41 obi-wan kernel: ncr_attach: unit=0 chip=810 base=ffbeff00, io_port=f800, irq=9 Jul 16 00:18:41 obi-wan kernel: ncr53c810-0: using memory mapped IO at virtual address 0x8841f00 Jul 16 00:18:41 obi-wan kernel: ncr53c810-0: requesting shared irq 9 (dev_id=0x10068) Jul 16 00:18:41 obi-wan kernel: ncr53c810-0: restart (scsi reset). Jul 16 00:18:41 obi-wan kernel: ncr53c8xx : at PCI bus 0, device 13, function 0 Jul 16 00:18:41 obi-wan kernel: ncr_attach: unit=1 chip=810 base=ffbefe00, io_port=f400, irq=9 Jul 16 00:18:41 obi-wan kernel: ncr53c810-1: using memory mapped IO at virtual address 0x8843e00 Jul 16 00:18:41 obi-wan kernel: ncr53c810-1: requesting shared irq 9 (dev_id=0x7ffc068) Jul 16 00:18:41 obi-wan kernel: ncr53c810-1: restart (scsi reset). Jul 16 00:18:41 obi-wan kernel: scsi0 : ncr53c8xx (rel 1.12a) Jul 16 00:18:41 obi-wan kernel: scsi1 : ncr53c8xx (rel 1.12a) Jul 16 00:18:41 obi-wan kernel: scsi : 2 hosts. Jul 16 00:18:41 obi-wan kernel: Vendor: CONNER Model: CP30540 545MB3.5 Rev: AEB8 Jul 16 00:18:41 obi-wan kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 16 00:18:41 obi-wan kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Jul 16 00:18:41 obi-wan kernel: Vendor: IBM Model: DPES-31080 !t Rev: S31R Jul 16 00:18:41 obi-wan kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 16 00:18:41 obi-wan kernel: Detected scsi disk sdb at scsi0, channel 0, id 5, lun 0 Jul 16 00:18:41 obi-wan kernel: Vendor: MICROP Model: 3243-19MZ Q4D Rev: HT02 Jul 16 00:18:41 obi-wan kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 16 00:18:41 obi-wan kernel: Detected scsi disk sdc at scsi1, channel 0, id 1, lun 0 Jul 16 00:18:41 obi-wan kernel: Vendor: DEC Model: DSP5300S Rev: 427L Jul 16 00:18:41 obi-wan kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 16 00:18:41 obi-wan kernel: Detected scsi disk sdd at scsi1, channel 0, id 3, lun 0 Jul 16 00:18:41 obi-wan kernel: scsi : detected 4 SCSI disks total. Jul 16 00:18:41 obi-wan kernel: ncr53c810-0-<target 0, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8. Jul 16 00:18:41 obi-wan kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 1045242 [510 MB] [0.5 GB] Jul 16 00:18:41 obi-wan kernel: ncr53c810-0-<target 5, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8. Jul 16 00:18:41 obi-wan kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2118144 [1034 MB] [1.0 GB] Jul 16 00:18:41 obi-wan kernel: ncr53c810-1-<target 1, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8. Jul 16 00:18:41 obi-wan kernel: SCSI device sdc: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB] Jul 16 00:18:41 obi-wan kernel: ncr53c810-1-<target 3, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8. Jul 16 00:18:41 obi-wan kernel: SCSI device sdd: hdwr sector= 512 bytes. Sectors= 5860155 [2861 MB] [2.9 GB] Jul 16 00:18:41 obi-wan kernel: eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 20 af da 7c f3, IRQ 10. Jul 16 00:18:41 obi-wan kernel: 3c509.c:1.07 6/15/95 becker@cesdis.gsfc.nasa.gov Jul 16 00:18:41 obi-wan kernel: Partition check: Jul 16 00:18:41 obi-wan kernel: sda: sda1 sda2 sda3 Jul 16 00:18:41 obi-wan kernel: sdb: sdb1 Jul 16 00:18:41 obi-wan kernel: sdc: sdc1 sdc3 Jul 16 00:18:41 obi-wan kernel: sdd: sdd1 sdd2 Jul 16 00:18:41 obi-wan kernel: VFS: Mounted root (ext2 filesystem) readonly. Jul 16 00:18:41 obi-wan kernel: Adding Swap: 130748k swap-space Jul 16 00:18:41 obi-wan kernel: eth0: Setting Rx mode to 1 addresses. Jul 16 00:40:38 obi-wan kernel: ICMP: failed checksum from 205.229.51.144! Jul 16 00:41:25 obi-wan last message repeated 3 times
|  |