Messages in this thread |  | | Date | Fri, 7 Jun 1996 02:36:18 -0500 (CDT) | From | ixx <> | Subject | compiling pre.14 w/lots-o modules |
| |
when I make a kernel w/ lots of module support I get so many errors.... well actually the things I saw this time were vfat support not supported by kernel and iso9660 support unsupported right after...... which is in my /etc/fstab.... then when my ppp script kicks off from /etc/rc.d/rc.local it says /dev/modem no such device...... (I did serial support as a module) I am doing auto load modules.... I do not know what the deal is but would like to use modules for all that I can
thanks, -taylor
btw, my /var/log/syslog and /var/log/messages had nothing to say
my stuff
I am on a pentium 100mhz, ide hd, 2 atapi cd-roms.... libc5.3.12, gcc2.7.2, binutils2.6.0.14, modules1.3.57....
here is my config:
# # Automatically generated make config: don't edit #
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KERNELD=y
# # General setup # # CONFIG_MATH_EMULATION is not set CONFIG_NET=y # CONFIG_MAX_16M is not set CONFIG_PCI=y CONFIG_PCI_OPTIMIZE=y CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_JAVA=m CONFIG_KERNEL_ELF=y # CONFIG_M386 is not set # CONFIG_M486 is not set CONFIG_M586=y # CONFIG_M686 is not set
# # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDE_PCMCIA is not set # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_TRITON=y # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_IDE_CHIPSETS=y
# # Note: most of these also require special kernel boot parameters # # CONFIG_BLK_DEV_ALI14XX is not set # CONFIG_BLK_DEV_DTC2278 is not set # CONFIG_BLK_DEV_HT6560B is not set # CONFIG_BLK_DEV_PROMISE is not set # CONFIG_BLK_DEV_QD6580 is not set # CONFIG_BLK_DEV_UMC8672 is not set
# # Additional Block Devices # CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_RAM=m # CONFIG_BLK_DEV_XD is not set
# # Networking options # # CONFIG_FIREWALL is not set # CONFIG_NET_ALIAS is not set CONFIG_INET=y CONFIG_IP_FORWARD=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ACCT is not set # CONFIG_IP_ROUTER is not set CONFIG_NET_IPIP=m
# # (it is safe to leave these untouched) # # CONFIG_INET_PCTCP is not set # CONFIG_INET_RARP is not set # CONFIG_NO_PATH_MTU_DISCOVERY is not set CONFIG_IP_NOSR=y CONFIG_SKB_LARGE=y
# # # CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m # CONFIG_AX25 is not set # CONFIG_NETLINK is not set
# # SCSI support # CONFIG_SCSI=m
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set
# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set
# # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_EQUALIZER=m # CONFIG_DLCI is not set CONFIG_PLIP=m CONFIG_PPP=y
# # CCP compressors for PPP are only built as modules. # CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_RADIO is not set CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_TR is not set # CONFIG_ARCNET is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set
# # Filesystems # # CONFIG_QUOTA is not set # CONFIG_LOCK_MANDATORY is not set CONFIG_MINIX_FS=m # CONFIG_EXT_FS is not set CONFIG_EXT2_FS=y # CONFIG_XIA_FS is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_UMSDOS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_ANIMAL=y CONFIG_NFS_FS=m # CONFIG_SMB_FS is not set CONFIG_NCP_FS=m CONFIG_ISO9660_FS=m CONFIG_HPFS_FS=m CONFIG_SYSV_FS=m CONFIG_AFFS_FS=m CONFIG_AMIGA_PARTITION=y CONFIG_UFS_FS=m # CONFIG_BSD_DISKLABEL is not set CONFIG_SMD_DISKLABEL=y
# # Character devices # CONFIG_SERIAL=m # CONFIG_DIGI is not set # CONFIG_CYCLADES is not set # CONFIG_STALDRV is not set # CONFIG_RISCOM8 is not set # CONFIG_PRINTER is not set # CONFIG_MOUSE is not set # CONFIG_UMISC is not set # CONFIG_QIC02_TAPE is not set # CONFIG_FTAPE is not set # CONFIG_APM is not set # CONFIG_WATCHDOG is not set CONFIG_RTC=y
# # Sound # CONFIG_SOUND=m
# # Kernel hacking # # CONFIG_PROFILE is not set
................... : taylor cc (ixx) : :::::::::::::::::::
|  |