lkml.org 
[lkml]   [2024]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 0/9] reset: amlogic: move reset drivers out of CCF
Date
This RFC follows the discussion about having reset driver in the clock tree
[1]. Ideally those should reside in the reset part of tree.

Also the code of the amlogic reset driver is very similar between the 2 trees
and could use the same driver code.

This RFC moves the reset driver of audio clock controller of the g12 and
sm1 SoC family to the reset tree, using the auxiliary bus.

The infrastructure put in place is meant to be generic enough so we may
eventually also move the reset drivers in the meson8b and aoclk clock
controllers.

[1] https://lore.kernel.org/linux-clk/e3a85852b911fdf16dd9ae158f42b3ef.sboyd@kernel.org

Jerome Brunet (9):
reset: amlogic: convert driver to regmap
reset: amlogic: add driver parameters
reset: amlogic: split the device and platform probe
reset: amlogic: use reset number instead of register count
reset: amlogic: add reset status support
reset: amlogic: add toggle reset support
reset: amlogic: add auxiliary reset driver support
clk: meson: add auxiliary reset helper driver
clk: amlogic: axg-audio: use the auxiliary reset driver

drivers/clk/meson/Kconfig | 6 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg-audio.c | 108 +--------
drivers/clk/meson/meson-clk-rst-aux.c | 84 +++++++
drivers/clk/meson/meson-clk-rst-aux.h | 14 ++
drivers/reset/Kconfig | 1 +
drivers/reset/reset-meson.c | 210 ++++++++++++++----
include/soc/amlogic/meson8b-auxiliary-reset.h | 17 ++
8 files changed, 293 insertions(+), 148 deletions(-)
create mode 100644 drivers/clk/meson/meson-clk-rst-aux.c
create mode 100644 drivers/clk/meson/meson-clk-rst-aux.h
create mode 100644 include/soc/amlogic/meson8b-auxiliary-reset.h

--
2.43.0


\
 
 \ /
  Last update: 2024-05-27 18:29    [W:0.075 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site