Messages in this thread | | | From | Hugo Villeneuve <> | Date | Tue, 9 Apr 2024 11:42:48 -0400 | Subject | [PATCH v4 0/5] serial: sc16is7xx: split into core and I2C/SPI parts |
| |
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Hello, this patch series splits the SPI/I2C parts for the sc16is7xx driver into separate source files (and separate I2C/SPI drivers).
These changes are based on suggestions made by Andy Shevchenko following this discussion:
Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/
The changes are split into multiple patches to facilitate the review process. In the end, some of them could be merged into a single patch.
I have tested the changes on a custom board with two SC16IS752 DUART over a SPI interface using a Variscite IMX8MN NANO SOM. The four UARTs are configured in RS-485 mode.
I did not test the changes on a real SC16is7xx using the I2C interface. But I slightly modified the driver to be able to simulate an I2C device using i2c-stub. I was then able to instantiate a virtual I2C device without disturbing existing connection/communication between real SPI devices on /dev/ttySC0 and /dev/ttySC2 (using a loopback cable).
Thank you.
Link: [v1] https://lore.kernel.org/lkml/20240206214208.2141067-1-hugo@hugovil.com [v2] https://lore.kernel.org/lkml/20240307161828.118495-1-hugo@hugovil.com [v3] https://lore.kernel.org/lkml/20240402174353.256627-1-hugo@hugovil.com
Changes for V2: - Move port_registered[] init before the for loop to prevent bug if aborting probe when i = 0 - Since patch f7b487648986 ("lib/find: add atomic find_bit() primitives") has been dropped from linux-next/master, rework patch 2 (sc16is7xx_lines) without find_and_set_bit.
Changes for V3: - Simplify sc16is7xx_lines allocation by using the IDA framework
Changes for V4: Changes after Andy S. review comments: - Fix commit description - Fix includes for IWYU - Add Reviewed-by tag (Andy) for patches 1 and 5 - Add exported symbols to SERIAL_NXP_SC16IS7XX namespace - Fix Kconfig deps - Keep Kconfig SERIAL_SC16IS7XX_CORE - Convert to a single Kconfig entry and automatically selects I2C and SPI interfaces if available. - Merge patches 2 and 3 - Add NXP and UART keywords to Kconfig description - Remove __maybe_unused from of_device_id - Simplify I2C init/exit with module_i2c_driver() - Simplify SPI init/exit with module_spi_driver()
Hugo Villeneuve (5): serial: sc16is7xx: add proper sched.h include for sched_set_fifo() serial: sc16is7xx: unconditionally clear line bit in sc16is7xx_remove() serial: sc16is7xx: split into core and I2C/SPI parts (core) serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines) serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_regcfg)
drivers/tty/serial/Kconfig | 47 ++---- drivers/tty/serial/Makefile | 2 + drivers/tty/serial/sc16is7xx.c | 261 +++++++---------------------- drivers/tty/serial/sc16is7xx.h | 41 +++++ drivers/tty/serial/sc16is7xx_i2c.c | 67 ++++++++ drivers/tty/serial/sc16is7xx_spi.c | 90 ++++++++++ 6 files changed, 277 insertions(+), 231 deletions(-) create mode 100644 drivers/tty/serial/sc16is7xx.h create mode 100644 drivers/tty/serial/sc16is7xx_i2c.c create mode 100644 drivers/tty/serial/sc16is7xx_spi.c
base-commit: fec50db7033ea478773b159e0e2efb135270e3b7 -- 2.39.2
| |