lkml.org 
[lkml]   [2024]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 05/16] x86/mce/amd: Clean up SMCA configuration
From
On 4/23/2024 3:06 PM, Borislav Petkov wrote:
> On Thu, Apr 04, 2024 at 10:13:48AM -0500, Yazen Ghannam wrote:
>> + /*
>> + * OS is required to set the MCAX enable bit to acknowledge that it is
>> + * now using the new MSR ranges and new registers under each
>> + * bank. It also means that the OS will configure deferred
>> + * errors in the new MCA_CONFIG register. If the bit is not set,
>> + * uncorrectable errors will cause a system panic.
>> + */
>> + mca_config |= FIELD_PREP(CFG_MCAX_EN, 0x1);
>
> Can we please drop this cryptic crap?
>
> mca_config |= SMCA_MCI_CONFIG_MCAX_ENABLE;
>
> if I trust the PPR.
>

Okay.

>> - this_cpu_ptr(mce_banks_array)[bank].lsb_in_status = !!(low & BIT(8));
>> + /*
>> + * SMCA sets the Deferred Error Interrupt type per bank.
>> + *
>> + * MCA_CONFIG[DeferredIntTypeSupported] is bit 5, and tells us
>> + * if the DeferredIntType bit field is available.
>> + *
>> + * MCA_CONFIG[DeferredIntType] is bits [38:37]. OS should set
>> + * this to 0x1 to enable APIC based interrupt. First, check that
>> + * no interrupt has been set.
>> + */
>> + if (FIELD_GET(CFG_DFR_INT_SUPP, mca_config) && !FIELD_GET(CFG_DFR_INT_TYPE, mca_config))
>> + mca_config |= FIELD_PREP(CFG_DFR_INT_TYPE, INTR_TYPE_APIC);
>
> Ditto:
>
> if (mca_config & CFG_DFR_INT_SUPP &&
> !(mca_config & CFG_DFR_INT_TYPE))
> mca_config |= CFG_DFR_INT_TYPE | CFG_INTR_TYPE_APIC;
>
> Plain and simple. Not this unreadable mess.
>

This is not the same.

"CFG_DFR_INT_TYPE" is a register field.

"INTR_TYPE_APIC" is a value. And this same value can be used in other register
fields.

I think it's fair to just use logical AND for single bit checks instead of the
FIELD_GET() macro.

But the FIELD_PREP() macro does help for setting bitfields. I think it's
clearer than manually doing the proper shifts and masks.

> And use proper prefixes with the register name in them:
>
> SMCA_MCI_CONFIG_
>
> or so, for example.
>

Okay. I was thinking to keep the names shorter since they are only used in
this file. But I'll change them.

>>
>> - wrmsr(smca_config, low, high);
>> - }
>> + if (FIELD_GET(CFG_LSB_IN_STATUS, mca_config))
>> + this_cpu_ptr(mce_banks_array)[bank].lsb_in_status = true;
>> +
>> + wrmsrl(MSR_AMD64_SMCA_MCx_CONFIG(bank), mca_config);
>> +}
>> +
>> +static void smca_configure_old(unsigned int bank, unsigned int cpu)
>
> Yah, at the end of the patchset there should be patches which remove all
> the _old things. Not in a different patchset. You can split things
> accordingly.
>

Okay. I'll include the follow up patches in the next revision of this set.

Thanks,
Yazen

\
 
 \ /
  Last update: 2024-04-23 21:32    [W:0.135 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site