Messages in this thread Patch in this message | | | From | Heiko Stuebner <> | Subject | [PATCH v2] arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger | Date | Mon, 22 Apr 2024 16:33:56 +0200 |
| |
From: Heiko Stuebner <heiko.stuebner@cherry.de>
The association of uart2 to the q7-uart pins is part of the module itself and not the baseboard used. Therefore move the pinctrl over to the tiger dtsi.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> --- changes in v2: - add comment specifying where the signals go to on the Q7 connector - add Quentin's review
arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts | 1 - arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 5 +++++ 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts index d672198c6b64..9bdd14799eff 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts @@ -231,7 +231,6 @@ &u2phy3_host { }; &uart2 { - pinctrl-0 = <&uart2m2_xfer>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index 72fe696b0034..4984e36a8c2d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -688,6 +688,11 @@ &tsadc { status = "okay"; }; +/* Routed to UART0 on the Q7 connector */ +&uart2 { + pinctrl-0 = <&uart2m2_xfer>; +}; + /* Mule-ATtiny UPDI */ &uart4 { pinctrl-0 = <&uart4m2_xfer>; -- 2.39.2
| |