lkml.org 
[lkml]   [2024]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] This patch series introduces support for PMI8950 PWM in leds-qcom-lpg.
Date
The first patch updates the device tree bindings for leds-qcom-lpg to
include support for PMI8950 PWM.

The second patch adds a pwm node to the device tree for the PMI8950. This
node is found on some msm8953 devices, such as the Xiaomi Mido, and its
inclusion in the device tree will enable infrared LED functionality on
these devices.

The final patch adds support for the PMI8950 PWM to the leds-qcom-lpg
driver.

The PMI8950 PMIC contains one PWM channel.

Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
---
Gianluca Boiano (3):
leds: qcom-lpg: Add support for PMI8950 PWM
arm64: dts: qcom: pmi8950: add pwm node
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM

Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml | 4 ++--
arch/arm64/boot/dts/qcom/pmi8950.dtsi | 8 ++++++++
drivers/leds/rgb/leds-qcom-lpg.c | 8 ++++++++
3 files changed, 18 insertions(+), 2 deletions(-)
---
base-commit: c0b832517f627ead3388c6f0c74e8ac10ad5774b
change-id: 20240402-pmi8950-pwm-support-f591864b1e28

Best regards,
--
Gianluca Boiano <morf3089@gmail.com>


\
 
 \ /
  Last update: 2024-05-27 16:19    [W:0.249 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site