lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ASoC: dt-bindings: fsl,ssi: Convert to YAML
On Wed, Apr 17, 2024 at 10:16 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 17/04/2024 11:25, Shengjiu Wang wrote:
> > Convert the fsl,ssi binding to YAML.
> >
>
> ...
>
> > +description:
> > + Notes on fsl,playback-dma and fsl,capture-dma
> > + On SOCs that have an SSI, specific DMA channels are hard-wired for playback
> > + and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
> > + playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
> > + playback and DMA channel 3 for capture. The developer can choose which
> > + DMA controller to use, but the channels themselves are hard-wired. The
> > + purpose of these two properties is to represent this hardware design.
> > +
> > + The device tree nodes for the DMA channels that are referenced by
> > + "fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
> > + "fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
> > + "fsl,mpc8610-dma-channel") can remain. If these nodes are left as
> > + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
> > + drivers (fsldma) will attempt to use them, and it will conflict with the
> > + sound drivers.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - enum:
> > + - fsl,imx50-ssi
> > + - fsl,imx53-ssi
> > + - enum:
> > + - fsl,imx51-ssi
> > + - enum:
> > + - fsl,imx21-ssi
>
> That's a mess... you cannot have enums as fallbacks.

ok, will use const.
>
> > + - items:
> > + - enum:
> > + - fsl,imx25-ssi
> > + - fsl,imx27-ssi
> > + - fsl,imx35-ssi
> > + - fsl,imx51-ssi
> > + - fsl,imx6q-ssi
> > + - fsl,imx6sl-ssi
> > + - fsl,imx6sx-ssi
> > + - enum:
> > + - fsl,imx21-ssi
> > + - fsl,imx51-ssi
> > + - items:
> > + - const: fsl,mpc8610-ssi
> > +
> > + cell-index:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [0, 1, 2]
> > + description: The SSI index
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + fsl,fifo-depth:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description:
> > + The number of elements in the transmit and receive FIFOs.
> > + This number is the maximum allowed value for SFCSR[TFWM0].
> > +
> > + clocks:
> > + items:
> > + - description: The ipg clock for register access
> > + - description: clock for SSI master mode
> > + minItems: 1
> > +
> > + clock-names:
> > + items:
> > + - const: ipg
> > + - const: baud
> > + minItems: 1
> > +
> > + dmas:
> > + oneOf:
> > + - items:
> > + - description: DMA controller phandle and request line for RX
> > + - description: DMA controller phandle and request line for TX
> > + - items:
> > + - description: DMA controller phandle and request line for RX0
> > + - description: DMA controller phandle and request line for TX0
> > + - description: DMA controller phandle and request line for RX1
> > + - description: DMA controller phandle and request line for TX1
> > +
> > + dma-names:
> > + oneOf:
> > + - items:
> > + - const: rx
> > + - const: tx
> > + - items:
> > + - const: rx0
> > + - const: tx0
> > + - const: rx1
> > + - const: tx1
> > +
> > + codec-handle:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description:
> > + Phandle to a 'codec' node that defines an audio
> > + codec connected to this SSI. This node is typically
> > + a child of an I2C or other control node.
> > +
> > + fsl,fiq-stream-filter:
> > + type: boolean
> > + description:
> > + Disabled DMA and use FIQ instead to filter the codec stream.
> > + This is necessary for some boards where an incompatible codec
> > + is connected to this SSI, e.g. on pca100 and pcm043.
> > +
> > + fsl,mode:
> > + $ref: /schemas/types.yaml#/definitions/string
> > + enum: [ ac97-slave, ac97-master, i2s-slave, i2s-master,
> > + lj-slave, lj-master, rj-slave, rj-master ]
> > + description: |
> > + "ac97-slave" - AC97 mode, SSI is clock slave
> > + "ac97-master" - AC97 mode, SSI is clock master
> > + "i2s-slave" - I2S mode, SSI is clock slave
> > + "i2s-master" - I2S mode, SSI is clock master
> > + "lj-slave" - Left justified mode, SSI is clock slave
> > + "lj-master" - Left justified mode, SSI is clock master
> > + "rj-slave" - Right justified mode, SSI is clock slave
> > + "rj-master" - Right justified mode, SSI is clock master
> > +
> > + fsl,ssi-asynchronous:
> > + type: boolean
> > + description: If specified, the SSI is to be programmed in asynchronous
> > + mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
> > + all be connected to valid signals. In synchronous mode,
> > + SRCK and SRFS are ignored. Asynchronous mode allows
> > + playback and capture to use different sample sizes and
> > + sample rates. Some drivers may require that SRCK and STCK
> > + be connected together, and SRFS and STFS be connected
> > + together. This would still allow different sample sizes,
> > + but not different sample rates.
> > +
> > + fsl,playback-dma:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: Phandle to a node for the DMA channel to use for
> > + playback of audio. This is typically dictated by SOC
> > + design. Only used on Power Architecture.
> > +
> > + fsl,capture-dma:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: Phandle to a node for the DMA channel to use for
> > + capture (recording) of audio. This is typically dictated
> > + by SOC design. Only used on Power Architecture.
> > +
> > + "#sound-dai-cells":
> > + const: 0
> > + description: optional, some dts node didn't add it.
>
> The question is: is this DAI or not?

Yes, it is a DAI. so, is there any issue here?

>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - fsl,fifo-depth
> > +
> > +unevaluatedProperties: false
>
> This must be additionalProperties:false. Use example-schema as
> reference... unless you want to reference dai-common.yaml, but then that
> one is missing.

As it is a DAI, so I should include dai-common.yaml, right?

Best regards
Shengjiu Wang

>
> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2024-04-18 05:05    [W:0.061 / U:1.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site