lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/9] PCI: endpoint: Rename BME to Bus Master Enable
On Thu, Apr 18, 2024 at 05:28:31PM +0530, Manivannan Sadhasivam wrote:
> BME which stands for 'Bus Master Enable' is not defined in the PCIe base
> spec even though it is commonly referred in many places (vendor docs). But
> to align with the spec, let's rename it to its expansion 'Bus Master
> Enable'.

Thanks for doing this. I'm always in favor of using terms from the
spec.

> - dev_dbg(dev, "Received BME event. Link is enabled!\n");
> + dev_dbg(dev, "Received Bus Master Enable event. Link is enabled!\n");

Nothing to do with *this* patch, but this message reads a little weird
to me because setting Bus Master Enable has nothing to do with link
enablement.

Also incidental: some of these messages and comments refer to a "Bus
Master Enable *event*". Does "event" here refer to the act of the
host setting the Bus Master Enable bit in the Command register? This
is in qcom_pcie_ep_global_irq_thread(), so I assume there's something
in the endpoint hardware that generates an IRQ when the Command
register is written?

> - * pci_epc_bme_notify() - Notify the EPF device that the EPC device has received
> - * the BME event from the Root complex
> - * @epc: the EPC device that received the BME event
> + * pci_epc_bus_master_enable_notify() - Notify the EPF device that the EPC
> + * device has received the Bus Master
> + * Enable event from the Root complex
> + * @epc: the EPC device that received the Bus Master Enable event
> *
> * Invoke to Notify the EPF device that the EPC device has received the Bus
> - * Master Enable (BME) event from the Root complex
> + * Master Enable event from the Root complex

There's no "set Bus Master Enable" transaction that would appear on
the PCIe link, so I assume "the Bus Master Enable event from the Root
Complex" is a way of saying something like "host has written the
Command register to set the Bus Master Enable bit"?

Bjorn

\
 
 \ /
  Last update: 2024-04-18 18:12    [W:0.095 / U:1.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site