lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v2] net: dsa: mv88e6xx: fix supported_interfaces setup in mv88e6250_phylink_get_caps()
Date
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.

Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().

Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---

Changelog:

v2: Replace mv88e6250_port_get_mode() with
mv88e6250_setup_supported_interfaces(), make sure we don't set
PHY_INTERFACE_MODE_NA in the bitmap

drivers/net/dsa/mv88e6xxx/chip.c | 56 +++++++++++++++++++++++++++++---
drivers/net/dsa/mv88e6xxx/port.h | 23 ++++++++++---
2 files changed, 71 insertions(+), 8 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c95787cb90867..59b5dd0e2f41d 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -566,13 +566,61 @@ static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported)
phy_interface_set_rgmii(supported);
}

-static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+static void
+mv88e6250_setup_supported_interfaces(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_config *config)
{
unsigned long *supported = config->supported_interfaces;
+ int err;
+ u16 reg;

- /* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
+ if (err) {
+ dev_err(chip->dev, "p%d: failed to read port status\n", port);
+ return;
+ }
+
+ switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY:
+ __set_bit(PHY_INTERFACE_MODE_REVMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_HALF:
+ case MV88E6250_PORT_STS_PORTMODE_MII_FULL:
+ __set_bit(PHY_INTERFACE_MODE_MII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY:
+ __set_bit(PHY_INTERFACE_MODE_REVRMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL:
+ __set_bit(PHY_INTERFACE_MODE_RMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII:
+ __set_bit(PHY_INTERFACE_MODE_RGMII, supported);
+ break;
+
+ default:
+ dev_err(chip->dev,
+ "p%d: invalid port mode in status register: %04x\n",
+ port, reg);
+ }
+}
+
+static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_config *config)
+{
+ if (!mv88e6xxx_phy_is_internal(chip, port))
+ mv88e6250_setup_supported_interfaces(chip, port, config);

config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
}
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 86deeb347cbc1..ddadeb9bfdaee 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -25,10 +25,25 @@
#define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900
#define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL 0x0a00
#define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL 0x0b00
-#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF 0x0c00
-#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF 0x0d00
-#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL 0x0e00
-#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL 0x0f00
+/* - Modes with PHY suffix use output instead of input clock
+ * - Modes without RMII or RGMII use MII
+ * - Modes without speed do not have a fixed speed specified in the manual
+ * ("DC to x MHz" - variable clock support?)
+ */
+#define MV88E6250_PORT_STS_PORTMODE_MII_DISABLED 0x0000
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII 0x0100
+#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY 0x0200
+#define MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY 0x0400
+#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL 0x0600
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL 0x0700
+#define MV88E6250_PORT_STS_PORTMODE_MII_HALF 0x0800
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY 0x0900
+#define MV88E6250_PORT_STS_PORTMODE_MII_FULL 0x0a00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY 0x0b00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY 0x0c00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY 0x0d00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY 0x0e00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY 0x0f00
#define MV88E6XXX_PORT_STS_LINK 0x0800
#define MV88E6XXX_PORT_STS_DUPLEX 0x0400
#define MV88E6XXX_PORT_STS_SPEED_MASK 0x0300
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/

\
 
 \ /
  Last update: 2024-04-17 12:38    [W:3.833 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site