lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] reset: reset-rzg2l-usbphy-ctrl: Ensure reset line is asserted in error path
Hi Geert,

Thank you for the review.

On Wed, Apr 17, 2024 at 3:38 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Thu, Mar 21, 2024 at 12:43 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > In the event of failure during devm_reset_controller_register(), ensure
> > that the reset line is asserted back.
> >
> > Fixes: bee08559701fb ("reset: renesas: Add RZ/G2L usbphy control driver")
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> > +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> > @@ -132,8 +132,10 @@ static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
> > priv->rcdev.dev = dev;
> >
> > error = devm_reset_controller_register(dev, &priv->rcdev);
> > - if (error)
> > + if (error) {
> > + reset_control_assert(priv->rstc);
> > return error;
> > + }
> >
> > spin_lock_init(&priv->lock);
> > dev_set_drvdata(dev, priv);
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Alternatively, you could register a cleanup handler with
> devm_add_action_or_reset(), like many drivers already do.
> Or better, turn devm_aspeed_peci_reset_control_deassert() into a
> generic helper, and convert all drivers[1] to use that.
>
Good point, I'll send an RFC patch for this.

> That would just leave us with undoing pm_runtime_enable(), which can
> be automated using devm_pm_runtime_enable() instead.
>
Agreed.

> [1] git grep -w devm.*reset_control_assert
>
Cheers,
Prabhakar

\
 
 \ /
  Last update: 2024-04-17 23:00    [W:0.058 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site