lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 5/7] serial: exar: add CTI cards to exar_get_nr_ports
Date
From: Parker Newman <pnewman@connecttech.com>

Add code for getting number of ports of CTI cards to
exar_get_nr_ports().

Signed-off-by: Parker Newman <pnewman@connecttech.com>
---
Changes in v3:
- moved to separate patch
- added spaces to single line comments

drivers/tty/serial/8250/8250_exar.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index e68029a59122..197f45e306ff 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -711,12 +711,28 @@ static unsigned int exar_get_nr_ports(struct exar8250_board *board,
{
unsigned int nr_ports = 0;

- if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
+ if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO) {
nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
- else if (board->num_ports)
+ } else if (board->num_ports > 0) {
+ // Check if board struct overrides number of ports
nr_ports = board->num_ports;
- else
+ } else if (pcidev->vendor == PCI_VENDOR_ID_EXAR) {
+ // Exar encodes # ports in last nibble of PCI Device ID ex. 0358
nr_ports = pcidev->device & 0x0f;
+ } else if (pcidev->vendor == PCI_VENDOR_ID_CONNECT_TECH) {
+ // Handle CTI FPGA cards
+ switch (pcidev->device) {
+ case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X:
+ case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X:
+ nr_ports = 12;
+ break;
+ case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16:
+ nr_ports = 16;
+ break;
+ default:
+ break;
+ }
+ }

return nr_ports;
}
--
2.43.2

\
 
 \ /
  Last update: 2024-04-17 22:33    [W:0.110 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site